Unlock and repair x65 v41 series 100% tested

  • Thread starter Thread starter s4sajii
  • Start date Start date
Hi Friends

Can somebody explainme what i have exactly to do after i have saved it for vklay3.3? i put it ito the folder: loaders and then i open vklay. What do i have to do then to get my phone unlocked?

THX
 
when u have problems u ask for help in english, then when u solve your problem u must put explanation of solution in english... isn't it?

I not tell it for me, I have not xx70 dead, but other users are in same situation that u



thanks hallo

WBR

thecult
 
But still i cant see freee solution for CXT70 v36 with AMD flash. Can anybody know what to do to remove simlock??
 
you do not need to downgrade soft!
after step 4, on first tab papua start service mode, you will saw service mode started, secuity status "Customer mode", then use SEND SKEY buton , and phone will open security status "Factory mode", (wich meen that ful eprom is opened) then save freia log, calculate map, run epprom tools upload map! procedure over!
if phone don't open security status "Factory mode", that meen that in phone is not original epprom block 5122, and you need to patch flash to open eeful!!!!!
This is org post by VASKE.
I get ewerything exept that SEND SKEY buton, could you tel me where exackly on
papuas software is that SEND SKEY buton.? Because can;t read this language.
I nead this to open oll eprom and save log.
 
Hello...i need cx65 patch file for this..to repair/unlock with sst
Phone only buzz now...i kill with eppromtools15...

Best regards
 
thanks huzsoft

some ppl don't know that exists x65 v41 that cannot be downgraded directly...

phones with new bootcore cannot be downgraded/unlocked/patched directly, independent of what kind of cable you use

the only way, for the moment, is this method (or martech II) ... and by this way you can repair 90% of phones damaged too
 
...it's not working. Some error ocured during start to write flash and stops. By the way, how to skip beckup flash in V_Klay? Every time I try to flash phone V_Klay says "new phone detected performing full backup", and I don't need these to do it.
Any idea?
Cheers
 
Hello
First I write that I used search function a lot and I haven't found solution so far.
I've got a problem with c65. It was switching on and worked with blue screen, all functions was ok. Then he powered on from time to time and now phone don't power on.
I can't boot it using papua (aby version). I've made everyting as here: http://babelfish.altavista.com/babelfish/trurl_pagecontent?lp=ru_en&trurl=http%3a%2f%2fforum.allsiemens.com%2fviewtopic.php%3ft%3d10831%26start%3d0%26postdays%3d0%26postorder%3dasc%26highlight%3d It worked for the first time, read esn and hash, but no imei and wrote that "imei is bad in bcore". Then I left it and searched for solution. Next time when I was trying to connect I got message:

AutoIgnition...
Transmit Boot...
Boot loaded ...
Pause 2 sec...
Retrieve information...
Unknown Flash type(ID:0081) č
 
Please, can somebody give me info on how to register papuas software?. I think it's my last resort.

I have papuas v042 and after booting with TP it gives me ESN 12345678... so it can't calculate keys, means I can't repair with other's fullflash

This all started with SST I did fullbackup (my mobile had C65 v12 lg01), then unlock and I got "wrong software" I tried repair with no success. Then I tried to fullflash my backup and I discovered that it was corrupted! SST did a corrupted backup, don't know why.

Now I have a big problem: I don't have original backup, I can enter service mode, I have all keys, but... some bad values in eeprom.


Somebody points me in a right direction, please?
Many thanks.
 
The Best Is The Martech But If You Want Free Program You Must Install Sst But The Problem Is This Soft Don't Work Ever
 
Java middlet by chaos is wonderful,with Papuautils 5.01 i make all my new siemens wihtout opening phone...and the genration of ESN/HASH ake maximum 15 minutes for SL65 v50.......very thanks to chaos,zyco,anjele and the other

www.unlockplanet.com/siemens.wmv
 
well i found it, not work on engl version 0.3.3.8,

but working on last v0.6.0.

now i have esn,and botkey and skey, but don't know what now ??

to many informations, but not straigt way what to do.

trayed enter skey in phone, with powered phone on,somthing is vrited on log screan,and stoped on Factory mode :what now, please, describe me like i am an little child...


yeah,yeah...i found it, now i need to close papuas, start maper,make map ( before maded log with papuas ), close maper, start eeprom,make BACKUP ALL, load map and save selected.


YES; my phone is unlocked!!!
 
Hey!
I need your help!

I got a S65 with FW 43 installed the new picture shows the testpoint, right?
I connechted (hold) a resistor to the TestPoint and connected the battery to the mobile started Pupas tool, i got the last sheet and pressed the Button at the bottom it shows me this message:

AutoIgnition...
Boot
 
I just manage to unlock Cx70, ver.36 . I forgot to turn on the phone after I made TP.

Thanks to all.... specially to thecult
 
Hej, don't worry, just send me the explanation on serbina and I will translate and put it here at the forum.

Thanks
 
solution is hard for unlocking (1 hour flashing in step 8 at least)... but after it you can unlock direct with any free soft

b.r.
 
I have the same problem. I have a cx70 v43 and in PapuaUtils v0.3.8d i have the same error on ESN:

AutoIgnition...
Transmit Boot...
Boot loaded ...
Pause 2 sec...
Retrieve information...
FlashID: 0001,227E
SIEMENS CX7V 353542007750429
HASH: 8188D2B5EF01B3E98F7DEB293B3A5E42
Unregistered version !
Wrong ESN from page "CODES" "!
??? ESN: 12345678
OTP IMEI: 353542007750429
Boot unlock .

Can i have a higher version of PapuaUtils? or ant advice it will be great

Best regards
 
Back
Top