Unlock and repair x65 v41 series 100% tested

  • Thread starter Thread starter s4sajii
  • Start date Start date
X65 can be downgraded only if the phone has older hardware, and need no testpoint shortcircuit. If newer HW you can not downgrade.
And Papuautils Presented by @the cult, is the only working free sollution at the moment. And it works.
br

huzsolt
 
Dont works..
They(older version like sst5.32) do not support TP solution..Only the new comercial versions of them, like sst 6.20, and martech II + x65 TP adapters..

But, at moment appers the x65PapuaUtils 0.3.8d in English, its more easy to unlock...
See, http://forum.gsmhosting.com/vbb/showthread.php?t=210932

And in the same link you see x65Mapper.rar..In this there is a little readme.txt that explain how unlock get codes from papuasoft and map, to upload to cell with eeprom tools..But anyway, you must use TP..(short to GND)...

Best Regards..
 
If you dont have a autoignition cable, just short TP to GND(earth), and when press button to read ESN and IMEI connect the two(2) pins = press redbutton.. See TP pic to see where is the pins of power button..
Eg: below, you see the red button who may be connected when read ESN and IMEI..(CX65 TP)

http://forum.siemens-club.ru/attachs.php?action=getfile&attachID=5534

Regards..
 
...menage the phone to work with V_Klay by making new .vxd file and now I try to flash phone with full beckuo from second phone using V_Klay to see what is gona be.
I let You now what is hapening.
Cheers
 
To SST_tem, I tought that I can able to repair my cx70 v43 kiled by
eprom tool whit save oll function( so phone only bip now).
I hawe SST v 6.30 and full flahsed phone do repair unlock but phone still bip.
So tell mee SST how can I repair my phone whit your software?
Seams to be, sst cant write eeprom protected fields or whot?
Is there eny pached flash wich can repair protected fields?
 
what i do wrong, or again my bad luck ???
TP ok, phone respond good BUT


Phone is Vodafon-VIP branded, soft v43 CX7V (cx70 )


AutoIgnition...
Transmit Boot...
Boot loaded ...
Pause 2 sec...
Retrieve information...
FlashID: 0001,227E
SIEMENS CX7V 354926007160589
HASH: 2FF5765D6525641BB68312F34CBF165C
Unregistered version !
Wrong ESN from page "CODES" "!
??? ESN: 12345678
OTP IMEI: 354926007160589
Boot unlock .
 
Where can j find "send skey buton" because j've got only hieroglis instead of inscriptions. The calculate map j have to do in Freia or papua? the same question about upload map. Thanks fo your answer
 
i have a hot dog that cannot be unlocked with craked sst, but sure SST v6.20 supports it for a long time





BR
 
Can I use for unlocking with this method the Original Siemens DCA-500 cable?


@Talk - what was wrong that the phone won't unlock ?
 
the process is:

- Make TESTPOINT
- push button on papuas
- PUSH START BUTTON ON PHONE (or use autoignition cable)
- if it loads bootloader ok then disconnect TESTPOINT quickly
- it finish process OK

if don't work first time, try and try and try

is much more easy with auto-ignition cable, for old MARTECH I users, don't leave martech to trash use it as autoignition cable, works 100%

If u want only to unlock phone (not flash or repair) you can do better this optimized method: http://forum.gsmhosting.com/vbb/showthread.php?t=212032

best regards

thecult
 
Back
Top