Well lets see:
1. your subs are DVC: Amp is 4 ohm to 2ohm safe
Running dual voice coils @ 4 ohm parallel will present the amp
with 2 ohms.
2. Running 2 voicecoils in series will present the amp with 8 ohms.
3. Running 1 voice coil is not an option.
Now running 2 voice coils wired parallel (1 speaker) to each channel
(you have 2) will give each sub 100 watts(50 rms) or using just one
speaker and bridging the 2 chanels you get 200 watts or 100 rms.
All that considered your amp is 14.4 volt. /0\
it wont run with car turned off with out a booster and you may wanna make sure your even running 14.4 while the alternators running.
a cheap meter will tell ya or have the techs at autozone or nearest car parts house check for you.