Brandon Seiler
New member
will these work fine together? here's the spec's on the amp
* 4400W RMS 2-Channel High Current Amplifier
* 500W RMS x 2 @ 4 Ohms Stereo
* 800W RMS x 2 @ 2 Ohms Stereo
* 1400W RMS x 2 @ 1 Ohm Stereo
* 2200W RMS x 2 @ 0.5 Ohm Stereo
* 4400W RMS x 1 @ 1 Ohm Bridged
* Digital LCD Display (Voltage, Temperature & Output Level)
* Platinum Plated Connections
* Quiet Fan Cooling System
* High Quality Power & Protection LED’s
* Thermal / Short / Overload Protection Circuitry
* 0-18 dB Variable Bass Boost
* 40-250Hz Variable High Pass Crossover
* 40-250Hz Variable Low Pass Crossover
* Remote Bass Control
* THD @ 4 Ohm <0.05%
* THD @ 2 Ohm <0.1%
* THD @ 1 Ohm <1.0%
* S/N Ratio: >90dB
* Channel Separation: 60dB
* Frequency Response: 20-20kHz
* Input Voltage Range: 200mV - 8V
* Input Impedance: 10k Ohms
* Dimensions: 2.7" H x 12.4" W x 27.3" L
looking to buy a 170amp alternator and a kinetik battery!
btw what kinda watts should the battery have. they have from 800-3800 watt kinetik battery's.
* 4400W RMS 2-Channel High Current Amplifier
* 500W RMS x 2 @ 4 Ohms Stereo
* 800W RMS x 2 @ 2 Ohms Stereo
* 1400W RMS x 2 @ 1 Ohm Stereo
* 2200W RMS x 2 @ 0.5 Ohm Stereo
* 4400W RMS x 1 @ 1 Ohm Bridged
* Digital LCD Display (Voltage, Temperature & Output Level)
* Platinum Plated Connections
* Quiet Fan Cooling System
* High Quality Power & Protection LED’s
* Thermal / Short / Overload Protection Circuitry
* 0-18 dB Variable Bass Boost
* 40-250Hz Variable High Pass Crossover
* 40-250Hz Variable Low Pass Crossover
* Remote Bass Control
* THD @ 4 Ohm <0.05%
* THD @ 2 Ohm <0.1%
* THD @ 1 Ohm <1.0%
* S/N Ratio: >90dB
* Channel Separation: 60dB
* Frequency Response: 20-20kHz
* Input Voltage Range: 200mV - 8V
* Input Impedance: 10k Ohms
* Dimensions: 2.7" H x 12.4" W x 27.3" L
looking to buy a 170amp alternator and a kinetik battery!
btw what kinda watts should the battery have. they have from 800-3800 watt kinetik battery's.