What kind of kickers would be better for this amp?

L

Lôckêd Pågé

New member
Ground Pounder Series 1-Channel Class D Car Amplifier
RMS Power Rating:
4 ohms: 375 watts x 1 chan.
2 ohms: 750 watts x 1 chan.
Max Power Rating:
1 ohm: 1500 watts x 1 chan.
PWM MOSFET Power Supply
Wired remote bass level control included
LED power and protection indicators
Tuned Bass EQ (0-10 dB bass boost at 45 Hz)
Single channel operation
1 ohm stable
Preamp RCA outputs
DC, short, thermal, and overload protection circuitry
Illuminated Crunch logo
Phase shift adjustments
Balanced line outputs
Silver-plated RCA inputs and outputs
Silver-plated power connectors
Variable low-pass filter (35-250 Hz, 24 dB/octave)
Subsonic Filter (15-35 Hz)
Frequency response: 15-250 Hz
Dimensions: 10.63"L x 8.54"W x 2.29"H

Kicker CompVR 07CVR122
•12" subwoofer with dual 2-ohm voice coils
•injection-molded polypropylene cone
•ribbed Santoprene rubber surround
•suitable for marine use
•power handling: 50-400 watts RMS (200 watts per coil)
•800 watts peak power handling
•frequency response: 25-500 Hz
•sensitivity: 86.7 dB
•top-mount depth: 6-1/4"
•sealed box volume: 1.0-4.6 cu. ft.
•ported box volume: 1.75-2.25 cu. ft.
•Recommended Q-Logic Box Type: 1, 2, 3

Or

•12" subwoofer with dual 4-ohm voice coils
•injection-molded polypropylene cone
•ribbed Santoprene rubber surround
•suitable for marine use
•power handling: 50-400 watts RMS (200 watts per coil)
•800 watts peak power handling
•frequency response: 25-500 Hz
•sensitivity: 86.7 dB
•top-mount depth: 6-1/4"
•sealed box volume: 1.0-4.6 cu. ft.
•ported box volume: 1.75-2.25 cu. ft.
•warranty: 1 year

The only difference is the OHMS.
I was wondering which one would sound louder and better. And how would I go as far as hooking them up?
 
check out this link:

http://www.rockfordfosgate.com/rftech/woofer_wizard.asp?submitted=true&woofer_qty=4&woofer_imp=4#

that will tell you how to wire them whether u have the dvc 2ohm or 4 ohm

for 1 sub and that amp you would want the DVC 4 ohm version

just get whatever matches the rms and ohms best
 
The ohms are for running a certain ohm load to the amp... If you want 2 subs, go with 2 2-ohm subs, so you can wire them to 2 ohms to the amp... If you only want one, go with the 2-ohm as well so you can run it at 4 ohms to the amp...
 
Back
Top