Unlock and repair x65 v41 series 100% tested

  • Thread starter Thread starter s4sajii
  • Start date Start date
Can we use this solution for unlocking older x65 versions ?
I mean without testpoint, of course.
I'm asking this, becouse sst doesn't work for me.
 
forget "patch eeprom blocks" expression, because I was talking about papuas factory mode activation (for full access to all fields of eep with eeprom tools)

sure that u have not cliked in any moment "write all" function?

ok, after "beep" you have fullflashed it with vklay by "bootcore key" method, but have u unlocked after it with SST? it's necessary for stop beeping after fullflashing.

if u have tested yet all this, then pls check any difference in dead phone pcb from the first one pcb... same kind of flash ic? have u altered any component by aplying testpoint?

post results, remember the unlocking with sst after fullflashing

wbr

thecult
 
i have m65 dead with Zzzz problem, i use papua's soft to calculate esn, hash ... etc, now when i do freeze the sw gives me this error ( Possible only in "Factory" SecurityMode! ) pls help
 
for C65 v43
look at :
http://forum.gsmhosting.com/vbb/showthread.php?p=1194032#post1194032
 
With AMD flash work only registered version Papuautils!!! Without registration U can't read ESN and unlock phone.Ask Papuas about registration.
BR.Bulba
 
solution work and with CX70 v.36,43....but don't work with AMD flash chip
All can be done for about 10 min and V-Klay is only for creating backup for safety For making EEP backup you can use and EEPTool 3.15
 
are u using papuas soft over 3.3 version?? AMD flashes are supported from 3.3 in advance

http://babelfish.altavista.com/babelfish/trurl_pagecontent?lp=ru_en&trurl=http%3a%2f%2fpapuas.allsiemens.com%2fx65PapuaUtilsV033.rar
 
Thanks man..Todey i sucefuli unlocked my cx65 v.41 by your totorial..I am very happy.... Its work fine...I do it with x65papuautilsv024a....
 
Hello all, please i will urge u guys to make all this steps more easier for beginners plzzzzzzzzzzz
 
OK, I found a solution myself

Phone did not start because of FFS_C corrupted filesystem. This is log from PapuaUtils:
---
Booting in "Normal Mode"...
Press P.ON !
AutoIgnition...
Transm. Boot...
Booting in Normal Mode OK
Wait to power on phone ...
Phone was OFF by error :
EXIT: 0260:5BCE
FILE:
fmexecc
CPSR: 60000010
CepId: 46FF
ExitString:
FFS_C
---

So, I found a good fullflash of same version as mine (v12 lg1), and I replaced FFS_C area (2E0000-4DFFFF) from good one to mine with Winhex. After that I wrote it back to phone with x65flasher. Last step was to repair EEPROM blocks 76, 5008, 5009, 5077, 5121, 5122, 5123 with x65PapuaUtils (BIG THANKS to Papua!!!). That was about it, phone back to life!

Hope it will help somebody...


(OFFTOPIC) @SST-GSM: It's not about money, I wanted to learn about mobile internals also. Ahhh, one last thing: Go eat your ****ty program! I would gladly pay "about 5-10
 
@andrija: you don't need this method for old sw version, if sst doesn't work then use legija's solution or other solutions free. But sst must work, check cable, check pc connection and check steps that u're using

regards

thecult
 
hi, go to first post on this thread, click link... there are both test points

b.r.

thecult
 
i still need help! :-/

Is anybody out there who got the keys of a S65 phone?

Merlin

also ICQ: 276774547
 
do you think it will work with my cxt70 version36 damaged vy martech. thanks for your great help.
 
Back
Top