Samsung Z107 UNLOCK SOLLUTION FREE

  • Thread starter Thread starter amitks_in
  • Start date Start date
If you are locking for samung z107 unlock sollution, why don't you just try with same program that you have when unlocking a z105?

simple use. com connector and short tx and rx pin 2-3 on the (com)
use samsung original usb cable PCB157ULE

1. plug in phone install usb drivers
2. open QIWS_V1.16(Service)_041011.exe
3. plug in com adapter (tx and rx shorted)
4. check if program finds samung modem. (if not found, go back to 1)
5. press ok
6. press unlock, (if you get usb error try to go to 4 and change the usb comport manualy to something else)
7. if phone unlocked insert a gsm card (if you have problem with network just change it manualy to gsm instead of automatic)

links for program and cable information can be found here...
http://forum.gsmhosting.com/vbb/showthread.php?t=173873

i have nothin more to say...

exept.... why but agere attack when they probably use same sollution themself for z105 and z107
 
hello!

it was werry kind of you to translate the posts, but pls for everyone to feel happy on this forum, watch the language
 
thnaks broth, i tried to unlock z105. i made cable and tel which sw shall i use?

gsmlab4u
 
i have here a problem

i try it with a z100 datacable
connected pin 2-3 in female DB9 and to the green cable in the samung usb cable with a switch

samsung modem is in port 14

Serial com...Good
WAIT! Detect USB Port
Sucess: direct USB Port...
Searching Samsung Modem...
Usb Port Open Sucess
Lock Read Fail

any ideas where the failure can be?
thx
 
http://webuser0.s23.deinprovider.de/Software/z105.rar

i can post a pic on the com pin 2-3 ("dongle") later when i get back home
 
you can read code NCK and enter manually

it is better than unlock directly

and for Nemooo dont forget yourself and write in english.verstanden ???
 
Also: You don,t need modify original samsung z107 cable. And change modem port to 4 or 5. Under 10. that works!
 
hi members if anyone having Z105 unlocking soluation pls send message imm-dtly.

gsmlab4u
 
Back
Top