Rockford Fosgate Amp Hookup? Help?

[Bradley C]

check all your connections. the power should run from the battery to an inline fuse, then to the power input on your amp. the ground should run from the ground input to a clean, non painted, non rusted area of the chasis. the remote runs from the output of your radio to the input of your amp. then rca's run from the output of your radio to the input on your amp. make sure all the fuses are good ( on the amp, in the fuse panel of the vehicle, and on the power wire) make sure all your connections are tight and clean, also, you can check to see if the speaker wire inside the box leading to the sub is connected. if the power light on the amp is not coming on, it is either a bad wire connection, missing a wire connection, or a bad amp.

 

[big_g9846]

I have a Rockford Fosgate T10001 bd model. I have a 10 in. kicker that I am trying to hook up to it. I have the positive wire, going to the batter, then I have the negative wire grounded to the chassis. Speaker wires are hooked up and everything. But I have no bass coming out of the sub. Nothing.

Can someone tell me what I am doing wrong? Also, I have fire coming through the + wire, but the amp light doesnt come on.

Can someone please tell me what's wrong with it?

Email - big_g9846.. If you need to go into details or whatnot

 

[Joe]

Is your remote wire hooked up? The amp will not do anything if the remote wire is not connected.

 

[wishmaster]

Do you have a remote turn on wire hooked to the amp.
If you do then the amp may be bad,assuming you have checked all the fuses.