Repair ALL A70 here

  • Thread starter Thread starter BB-gsm
  • Start date Start date
@BB-gsm..

I have a Siemens A-70, got it but not power on..

Used service mode:
-----------------------------------------------------------
Loading ServiceBoot...
Sending ServiceBoot Ok.
HWID: 241 (A70)
A70 lg98 Sw13 25.05.05 16:29:10
IMEI: 356471002147125
DisplayID: 52, Hyundai D0986EF
Code(05): OTP closed
Code(09): BootKEY is written in EEPROM
Code(0C): Keys miss in BCORE (CleanBCORE)
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(1A): Block 76 is accessible
Code(1C): Block 5123 is not found
Battery Voltage very low! 3690 mV!
SecurityMode: Customer
----------------------------------------------------------
I used Joker 0.3.4.3, en your repair flash file, still the same..

After flash it says, 'use freeze' But using freeze it says 'no ping'.

Can you help me out..

Thanks in advance!

Kelvin
 
if You just wont to unlock use ReCalc All Keys and it'll read Bcore and Eprom and then writ them back unlocked - off course Tp cutted
 
@ kasra

Just fullflash the phone with above proper file !
(Then save the parts of fullflash: eeprom, boot .. if u need for further)

And do not write "send me" words here !
 
wow great work i didnt get phone after reading this post but hope that it well work for me when i got phone i must post the result


REGARDS

GSM MIND
 
@BB-Gsm
10x BB-Gsm - really good work.

@mysticmist
but i received that answer on page
Hotlinking is not allowed. You must Click directly from site.
 
u missed some info. Try to another version and full flash again.
after 'recalculate all keys' .
B.R.
 
A70 after ful flash but it revive health data, and it works but I can not eteigne motive normal
 
i had an a70 dead i done test point aand full flash now phone is working but no network, the T.P is good and no damage tracks cause i checked them from the other threads, i also benq full flash since in the back sticker it says benq set still no network can someone help me
 
@ BB GSM and other pros

I have an order from a local Network provider .. to lock their phones almost 5000pcs A70

Please tell me what is the best box to do this job fast ,, i have ordered Martech 2 Plus and how to do it without test point

Do i just put the network providers id as in 640-04 and press lock to network and it will be done or there is another procedure to do it ,,???

Please help me

thanks
AK
 
Good work, it is not necessary any more to search for files under all types flash chips for a70
 
i have been doing all the things you said here with 2 pieces of a 70, but the phones doesn
 
Back
Top