Repair ALL A70 here

  • Thread starter Thread starter BB-gsm
  • Start date Start date
I`m having also trouble with A70.I`ve tried to fix the freeze problem, but nothing.I have fixed the connection from the UPP (B:13) to R396 but it still freezes.I have not tried the solution from Chris, because i don`t want to desolder the CPU it`s risky.
If someone solved this kind of a problem let me know, or how to find out which connection`s are damaged.
 
sir a70

FullFlash file info:
FlashID: 0001/221D
SIEMENS A70 Sw32 lg91
RealLgPack: lg91
Start...
Loading BootsModel(A70)...
Sending StartBoot Ok.
Sending MainBoot Ok.


hash =fffffffffffff
how to solve this hash-fffffffff
tp cutting is ok
Warning: HASH data error!
SIEMENS A70 lg98 Sw32
Soft FlashID: 0001/221D
FlashID: 0001/227E-221D-2200
Flash Size: 4Mb, WriteBuffer: 32 bytes
Region(1): Blocks 64, Size 64Kb
EEPROM segments not found!
FSN: B748F961 -> PhoneID: 61F948B7
OTP IMEI: 358129000373501
HASH: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
USE SKEY: 29928295
*#0000*12345678# - Network Lock
*#0001*12345678# - Service Provider Lock
*#0002*12345678# - Corporate Code
*#0003*12345678# - Phone Code
*#0004*12345678# - Network Subset Lock
*#0005*12345678# - Only Sim
ClearFlashSeg at 0x800000 does not answer
 
I have a siemens a70. which just trun of if SIM inserted. without SIM it dosent trun off. I flashed it with joker 0.3.5.2 by cutting test point. do any one have any solution??????
 
FlashID: 0001/227E see this is A70 model. i hav dead phone after unlocking
phone doesnt poweron, i cut TP after used jokerv17 then see wht happend?
Loading BootsModel(A70)...
Sending StartBoot Ok.
Sending Boot2 Ok.
Sending Boot3 Ok.
Sending MainBoot Ok.
Com2 115200 BAUD: Ok.
FlashID: 0001/227E
HASH: 6A00C62B53C0DAD04ED70C68BD709996
SIEMENS A70 lg5
OTP IMEI: 357784005007354
FSN: 85E4AC89 -> PhoneID: 89ACE485
Use EEP IMEI: 357784005007354
Write New EEPBlock 76,5008,5009,5077 Ok.
Boot terminated.
UnLock Ok!
any soluation????????????

gsmlab4u
 
It is hardware problem, damaged TP area for sure, search the forum to find a solution !



Regards,
B
 
...fullflash including bootcore area and unlock it after using Joker 3.2.4
Use other fullflash file for AMD flash chip.
dagos
 
@ KelvinShadow

All you have to do is to writee the proper flashfile and after flashing press Recalc all keys !


Is it so difficult ?!


Regards,
B
 
It is not my fault you try to login at my FTP anonymously!
Try in Passive Mode, and enter the username and password!
 
MY A70 AFTER FLASH JUST KIGHT TRUN ON THEN OFF
SEE THIS DETAILS AND GIVE A SOLUTION'
SERVICE MODE
Code: 
Loading ServiceBoot...
Sending ServiceBoot Ok.
HWID: 241 (A70)
A70 lg91 Sw32 18.08.05 10:41:35
IMEI: 359068009923271
DisplayID: 52, Hyundai D0986EF
Code(05): OTP closed
Code(09): BootKEY is written in EEPROM
Code(0D): Keys are registered in BCORE 
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 4183 mV.
SecurityMode: Customer
INFO
Code: 
Get Info...
HWID: 241 (A70)
A70 lg91 Sw32 18.08.05 10:41:35
IMEI: 359068009923271
DisplayID: 52, Hyundai D0986EF
Code(05): OTP closed
Code(09): BootKEY is written in EEPROM
Code(0D): Keys are registered in BCORE 
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 4143 mV.
SecurityMode: Customer
DSP Firmware Version 00, Power Asic Project ID: BB, RF Chipset ID: 0B
EELITE Info: free buffer 3854 bytes, free at all 9108 bytes, free for deleted 9108 bytes.
EEFULL Info: free buffer 68458 bytes, free at all 68670 bytes, free for deleted 3278 bytes.
Battery Ri measurement: CutOff Idle: 3415mV, CutOff Talk: 3535mV, CutOff Idle: 3415mV, CutOff Talk: 3535mV, CutOff Idle: 3415mV, CutOff Talk: 3535mV, CutOff Idle: 3415mV, CutOff Talk: 3535mV.
Operating time: Total 16038 sec, Current SW 16038 sec.
Talk time: Total 0 sec, Current SW 0 sec.
CSD: Total 0 bytes, Current SW 0 bytes.
GPRS: Total 4294967295 bytes, Current SW 4294967295 bytes.
CALC SKEY
Code: 
Start...
Loading BootsModel(A70)...
Sending StartBoot Ok.
Sending MainBoot Ok.
SIEMENS A70 lg91 Sw32
Soft FlashID: 0001/221D
FlashID: 0001/227E-221D-2200
Flash Size: 4Mb, WriteBuffer: 32 bytes
Region(1): Blocks 64, Size 64Kb
Start EEPROM segments at addres 0xBC0000
FSN: D8C25028 -> PhoneID: 2850C2D8
OTP IMEI: 359068009923271
HASH: F5FCD5651FA85C213F9B003E47EF53C0
Read EEP5009 block (ver00), size 10 bytes - Ok.
EEP IMEI: 356471001969164
Boot terminated.
Test and Calc Skey...
Skey not found! BCORE HASH incorrect for this phone FSN!
Use ReCalc Keys in BCORE!
RECALC ALL KEYS
Code: 
Start...
Loading BootsModel(A70)...
Sending StartBoot Ok.
Sending MainBoot Ok.
SIEMENS A70 lg91 Sw32
Soft FlashID: 0001/221D
FlashID: 0001/227E-221D-2200
Flash Size: 4Mb, WriteBuffer: 32 bytes
Region(1): Blocks 64, Size 64Kb
Start EEPROM segments at addres 0xBC0000
FSN: D8C25028 -> PhoneID: 2850C2D8
OTP IMEI: 359068009923271
HASH: F5FCD5651FA85C213F9B003E47EF53C0
Use OTP IMEI: 359068009923271
USE SKEY: 12345678
*#0000*12345678# - Network Lock
*#0001*12345678# - Service Provider Lock
*#0002*12345678# - Corporate Code
*#0003*12345678# - Phone Code
*#0004*12345678# - Network Subset Lock
*#0005*12345678# - Only Sim
Read BCORE addr: 0x800000 size: 0x010000...
Error Read Flash block 0x800000 size 0x004000!
 
i have problem,my a70 flash with joker,"Start...
Loading BootsModel(A70)...
Error: Load StartBoot answer code 0x00!..
can u tell me,what is that problem...?
thx b4
 
@ gsmlab4u

Dont worry, there must be eeprom backup folder of joker in the same directory where is joker.exe !

Just write the eeprom backup of your phone

If not working, just write provided fullflash above (4MB_221D_FF will fix it) but flash it with latest v3.4.3 joker not that old one you are using now



Regards,
B
 
thank you very much for this great help, my dead phone is alive again but my problem is about flash language no french language included how can i fix this problem or would you like to upload A70 flash wich include french language thank you in advance
 
Error Read Flash block 0x800000 size 0x004000!

Thats Your problem - try reflesh it and then RecalC All Keys
 
Back
Top