Official 3200 Thread

  • Thread starter Thread starter AndreGT6
  • Start date Start date
So...same as everyone else...V107 would not take. New receiver arrived today. Low and behold, V104. (No real surprise to be honest). They swapped machines from Bell's end, within 15minutes machine was 'downloading vital program information' and with that came V107.
One thing I noticed...bootstrap version of current machine is 1416GEMD...quite certain it was different on V104 machine.

PS: They called back 2hours later to ensure all was good.

So far so good. Fingers crossed V107 is as good as expected. ;-)
 
COOL!!!!!!!!!!!!!!!!!!!!!!! I got the TV on in my office all the time and the Caller ID would be great to have on screen. :)
 
Cliff, Thanks for the info.... I now just reset it everyday when no one is watching it, like clockwork.

They go to fix this thing!!!

W :confused: W
 
I noticed that in V104 there is a debug screen in "Diagnostics":

[Menu] -> 6 -> 3 -> Counters

There are 17 items listed in the Diagnostic Tests window. Use the page up/down buttons to scroll through them.

Here they are:

01) Watchdogs:
02) Boot Recoveries:
03) AC Power losses:
04) Queue Filled:
05) Queue ID:
06) Authorized Services:
07) Successful Downloads:
08) Previous Software:
09) Lost Locks:
10) Modulator Resets
11) Last Connect:
12) Caller ID Successess:
13) CID Current Failures:
14) PLM State:
15) SMS Status:
16) SMS Delay:
17) 911 Count:

Not sure what they all mean, but interesting never the less....

W;)W
 
Picked one up on the 27th (F&F sale). Set it up today. Works good. So far I'm only running one tuner but will connect the second in a couple of days.

Edit:

Just wanted to add that the Screensaver is wreaking havoc on my ReplayTV. It pops up after 4 hrs of inactivity, and after every guide update. When the the replay goes to record, it ends up recording the Screensaver instead of the channel. PITA!! :(
 
Since I got the update I have tried everything and I cannot make it crash, leave off all night , leave off all day, switch on switch off , caller ID working. guide update working(3am default setting).even tried timers they work (first time for me) So far I am happy and when it comes to watching TV no one should have a problem.
 
Whilst this may go against general experience, I can confirm that caller ID and the ability to update guide overnight without locking receiver are both working with the two 3200's I have - both of which are now v103. Caller ID works with both tuners in each receiver

I was also able to get the "search" function going on one, by doing a "memory dump"

Menu-6-3
Info-Browse-theme (memory dump screen appears)
press info again
Unplug to complete process

So I cannot find anything wrong with either receiver apart from ITV not working (so far!!!)

The caller ID is "slower" on the 3200 (appears after second ring) vs. a 5800 (appears between first and second)

Another issue here may be the date of manufacture
This can be deduced from the number under the upper barcode on the bottom of the receiver

See this link
http://ekb.dbstalk.com/146

the receivers I have are numbered
RBXGCPxxxxxG (returned)
RBXGCPxxxxxG (required memory dump to get search going)
RBXGCPxxxxxK (the replacement reciver)

I have replaced my unique numbers with x's

From the link above, I reckon the "P" (7th last character) represents 2004 - they probably skipped "O" as they skipped "I"
So the G receivers were made in July 2004 (altho purchased in the $99 sale around Xmas), and the K receiver was made in December 2004 - at the time that Expressvu discontinued them - so it looks like they are getting "new" ones in for replacement, or at least I got one

Date of manufacturer may have nothing to do with it, but I assume they do make modifciations thru production, and I would not expect Expressvu to tell us this - interested to hear from others who may have an earlier date of manufacture
 
That was an old post of mine, before the v104 update. The 3200 is working much better now, but it is still not perfect. So, the Dish Pro Quad had nothing to do with it.

I find with the 3200, that if it loses power and then reboots it may lock up once or twice within the next couple of days, then it's okay again. I have learned to reset it with the power button when this happens, that way you don't unplug it and start the cycle all over again.

WW
 
So far no updates.

But every 15 mins the unit seems to cycle on and off.

IE the screen saver turns off, the tv goes to static (RF mode) green light comes on and then goes off back into saver mode.

We'll see if the unit freezes after beening off for an hour.

A.
 
Called Bell for a third time. Again stepped through a number of the menu screens, unplugged the receiver and plugged it back in, tested the switch, checked software version a couple of time, etc. Finally was told to turn off the receiver and once again leave it off for a couple of hours. I was told that the receiver would download the software for sure this time because of something he did at their end.

I'm betting I have to call again.
 
After another 45 min on the phone with BEV today they were unable to get my 3200 to update. They offered 2 ,3100's or a 3200 with V107 already installed. I said send the 3200 as the 3100's are more out of date then the 3200. Will let you know what happens.
 
Went to local BEV outlet today - learned that the 3200 series has been pulled out from product line. According to BEV Rep too many software issues - they may come up with another system - no idea at this point when that will be.
Purchased a 3100 instead. $99.00 plus tax - no longer $4.99 per receiver fee it has been abolished.
 
Yes, I am using RG6. I didn't realize I was supposed to use RG 59 on a Bell dish. I had used RG6 on a Direct TV dish and it worked OK.

Thanks for the input ABL.
 
This policy started after a large percentage of single tuner PVR owners downloaded buggy E545 software a year ago. If there is a flood of complaints coming in regarding new software (from the first batch) then the others will not obtain the software and in some cases the software can be rolled back on those few models. This actually had happened with the 3100 not long ago. software version E536 was only in the stream about 3 days before it went back to E535.
 
I bought on ebay a evu card and dish network 3200 equiv receiver. Called expressvu & they said I could activate the box & card verified 3 times. If i pick up expressvu satelitte , will it show on box wrong satellite but still give signal strength. if I turn off box will it download software?
 
Hmm been a month and I'm still at v107 works pretty well now, even got the no audio bug fixed. (knock on wood)
 
Did they try the method of doing a full reset, including a wipe of your card from their end?
THis process takes several hours, as they can wipe your programiing and card clean very quickly, but it seems to take several hours before the receiver either takes your programming again, or is sent it.

Hope this is not a similar fiasco for everyone
 
Back
Top