Lg 03 ->Lg 04

  • Thread starter Thread starter dagos
  • Start date Start date
...this is strange
Verify your .bin file size. Is need to have exactly sizes with the other fullflash files. I don't know why don't working. To make firmware upgrade you need to have the full charged battery. About the Sw version 92. Papuautils create executable file with version 92 label, not important now.
To know how to create and (after) flash your phone using generated swup file, download movie from http://papuas.allsiemens.com/AllBugSGold.rar and see the part for creation swup file and flashing using this generated file.
About the cables, I use two cable types; one for unlocking/flashing (C55 serial cable) and one for make upgrade/downgrade firmware (X55 data cable). Is good to use for making firmware upgrade (on X75 series) the USB data cable DCA540 (of course, you need to install drivers first). Is easy to construct this cable, see on attachemment for schematic.
You have the last option (if your swup file don't working) to fullflash your phone (with LG3) using generated fullflash file, but you need to unlock it after. In case to you want, save first (write on the paper) ESN and HASH from your phone, or save "V_Klay.VKD" and (X65flasher.ini).
dagos
 
ups, ups, ups, I just now check to upload again firmware 47_0300 ( with russian, what I currently have) and same problem exist, so something is wrong with phone, or maybe cable, I must to check and will inform you

No no , everything is OK, original software works as well, problem was because WINSWUP 4.18 is started and communication port was blocked, noe I close your winswup and run again original SL75_470300.xbz.exe and now must to wait until upgrade.

So conclusion, with original I don't have a problem, but with my bin and xbi and your WINSWUP 4.18 it coudn't start upgrade procedure.

Is it ggod that I just check "software" and "lg pack" when I created xbi or exe, or I need to checked also EEFUL, EELITE and rest of FSS, what you think?
 
im happy man its work 4 me.
i tryied.u can also use this method.
good luck''''''''''''''''
 
Hi Dagos,
you really try to help me, thanks and I hope that we together will solve this situation
I made read flash with X65flasher.
1. I put bsreader to phone and start application for generation of ESN, HASH etc., when I get it on the display I put those values into X65 flasher and start read flash option.
My bin file has exactly 100.663.296 byte. During flashing I didn't get any errors.
I don't think so that problem is on cable, because as I wrote last night I flashed again with Winswup 470300.
So problem could be in bin file, or how I make conversation into swupexe file.

I will check again and let you know
Thanks friend still one time
Br,
Sandi
 
Hello, do you have also SL75 if YES, how bytes has your bin file?
And what you did to have your lang. pack?
 
...of course...
Too manny times without any download -> erased
http://rapidshare.com/files/164333554/WinSwup.rar

dagos
 
Back
Top