Lg 03 ->Lg 04

  • Thread starter Thread starter dagos
  • Start date Start date
...hmmm
This error not is from the WinSwup version.
Your phone not comunicate with PC.
Try the following two methodes:
1. Open your phone -> Connect datacable-> Open Swup executable -> Select port -> Select baudrate (115200 for serial cable) -> Start. Your phone will be power off automatically and upgrade is started (Connect phone).
2. Power off your phone-> Connect unlock cable -> Open Swup executable -> Check "Skip" in "PreCheck" row -> Start and quicly push short the phone red button.
dagos
 
...before flash the firmware upgrade files, loocking to the complet name. In your case the filename is SL75470300_service.exe. What you suggest this name???
On this site exist the other file SL75520100.xbi_update.exe....Other architecture, other size, same functionality.
Try to make one SWUP file (or XBI file) with the all options (except, of course BootCore) and try to flash using in the first phase unlock cable and after data cable...
dagos
 
Dear dagos, even with your new WINSWUP 4.19&4.20 I didn't have success

http://rapidshare.com/files/92157265/SL75_12022008.bin.html

The link above contain my bin file with SL75_470400.bin

Please if you have one SL75, try what we discussed and let me know.
Thanks in advance

This bin file was done with X65 flasher_1072. if you need more data tell me

Thanks still one more

Br,
Erogsm
 
Hi Erogsm,
Because I have uncertainty about your fullflash file, please create the other fullflash file using X65Flasher v.2.103 (in attachemment), compress(using winrar or winzip) and place to the rapidsahre (of course, send to me the link...). Your bin file seems to be corrupted, because only Papuautils 111b convert this file and if I try to flash it with WinSwup give error "Flash wrong" . Do not try to flash your phone with this fullflash, because is possible to damage your phone!!!! Erase this file from the rapidshare!

BTW. copy config.ini from the old X65flasher-1072 folder to the new created folder (X65flasher-2103). You don't needed to read/write again ESN;HASH and BOOTKEY.

Best regards,
dagos
 
Hi dagos, yes it is communicated with Papuas or any swup exe file.
I have 2 original WINSWUP files first is SL75_470300.xbz.exe and second is SL75-390400.exe.
When I start both od them on the top of SWUP is written V4.18, but when I made my bin file with papuas and your SWPXV4.15 I got exe file, but when I started it opened SWUP V4.15.

So I stil think that problem exist on older SWUPexe file, because

for all of the below 2 points what you wrote I got always the same message:
Cant connect to Mobile with BootstrapLoader on Com 1

Also on the right side of WINSWUP in the text SVN: instead of version 47 ( when I start 47 or 39 it always stated to the right version, but when I start my bin->xbi->exe I got 92 ?????
Also when I try to upgrade the same version as it is current like SL75_470300xbz.exe with new bootstrep 4.18, it upgrade my phone as well :-))
So it is no problem with communication I am 100% sure
 
Hi dagos,
just now checked I saw that this bin which I sent you was flash with 2103 not with 1072.
Problem is when I read full flash. I saw that I read twice and when I compare them via WinHEX they are different?

So I flashed twice the same SL75 with X65 flasher 2103 both have same size, but with comparing them they are different inside?????

I will do what you said but afternoon, becuase some friends will come to me :-))
 
...the service cable it is the unlocking cable (your cable in this case).
The data cable is the other cable.
...and the other hint:
Winswup files working with the data cable only with the option: Phone ON and "skip" PreCheck option UNCHECKED!
GIVE TO ME WHICH TYPE OF THE CABLE YOU HAVE (CODE).
dagos
 
Dear dagos,
I have home made cable from myself. I am not new in this business. I unlocked mobiles from 1998, but last 3 years it is not anymore my hoby, due to Siemens crashed :-)).
With this cable I unlocked more then 1000 pieces of Siemens phones and cable is good 100%, but .....
WinSWUP which I have version 39 from my lang 04 and version 47 with lang pack03 have app 25MB. Also when I make conversation only "software+lg pack" and make WINSWUP I get the similar 26MB, so I hope it is not possible to make EELITE, EEFUL and FSS's because in that case my XBI has app 80MB.
Now, I start again and battery is empty :-((.
I also check "skip button" and short trying to switch on phone, but always appears some errors :-((
Fuc... language, I lost more then 2 days because it
 
...OK,
download from http://rapidshare.com/files/91580482/winswup.418.rar
Unrar, start WinSwup and open your saved .xbi file (from papua)
Now you have two possibility:
First:
1. Turn OFF the handset and connect it with computer using appropriate cable.
2. Run the Winswup 4.18 application, configure the ComPort and baudrate of the cable where the handset is connected. Keep the 'Force ComPort' unchecked.
3. Open the selected XFS file (change the Files of type into FFS-Content *.XFS).
4. Change the update-concept to Force BSL, unsecured mode (Option\Update-concept).
5. Skip the pre-check and post-check.
6. Press the 'Start' button.
7. Wait until the process is finished before shutdown the winswup application.

Second:
1. Set the update-concept to secure mode in the option menu of winswup.
2. Phone need to be turned ON
3. During pre-check, winswup will shutdown your phone and replacing old firmware
4. Wait unill the process is finished before shutdown the winswup application.
Br,
dagos
 
...OK, I'm waiting...
Size of the SL75 fullflash files is the same, but have differences in the binary code (instructions)...Only papuautils v111 open this file, other papuas software don't recognise this file. I needed the second fullflash file, to compair and if is everityng OK, to convert this good file in SWUP or Language Pack bin file (because inside you have the same firmware version) and without to modify bootcore.

Br,
dagos
 
It is below, try something and give me result


http://rapidshare.com/files/92382238/SL75_470400_160208.rar.html
 
please look at this attachment, why on the right screen SNV is version 92???? why is not normal version 47. My bin file is good I hope so
 
Forgot to tell you that when I make conversation with my bin file I checked only " software" and "lg pack", all other options I unchecked, like EEFUL, EELITE, BCORE, FSSA, B, C

I just would like to update lang pach so have a fear about EEFUL and EELITE
am I right?
 
Hi,
Good news bro!
I verified wht is happened and now I have the response.
Papuautils not make correct conversion from the fullflash bin to the user SWUP. So, I used SMELTER software and I convert the fullflash bin to the language flash package (bin). You need to flash it using V_Klay software. Because this soft doesn't recognise (by default) X75 phones you need to:
-open papuautils software, calculate SKEY and BKEY (I writed how to) and click on V_Klay.VKD (from the Codes menu).
-save the loader file (your IMEI.vkd) in the folder named Loaders (in V_Klay\data foldertree). Leave one copy in the papuautils folder, because you don't know...
- Open V_Klay and choose the phone model as loader name.
- go to "Flasher" tab and click on "Open File".
- click on "Write Memory" and wait to finish.

Download file from:
http://rapidshare.com/files/92519771/SL75_4704.rar

Download V_Klay from:
http://www.vi-soft.com.ua/index_e.htm

Supplimentary you have in archive eeprom file and the ringers file.
I propouse to make fullflash backup from your LG03 phone before to flash the new language pack file.
Good luck,
dagos
 
or this attachment, with your WINSWUP 418 and my xbi file
Total confused, isn't it?
 
Finnaly I got it!

Thanks still one more my friend and stay good!


Br,
Erogsm

P.S. Years, years. In 2000, I was the first guy which implemented for
C35&S35 mobile phone, Croatian, Serbian, Czeck, Slovakai and rest language pack. In that time those language didn't exist for these models. After that paralel with my job it was my hoby, but last two/three years I once per month visit this greatfull site.
So thanks "dagos" and administrator of this site because also in this long time ago, it was NUMBER 1 for MOBILE PHONES (celular)
 
doesn't work,

you have right it is not problem with winswup, but I don't know where is a problem

first possibility I unchecked and power on phone, got message
"could not switch on mobile"
second possibility I checked skip button and got
" nothing received after BOT - Block 1"

How is it possible that I don't have a problem with original exe files?, but with those conversation to xbi ????

Thanks still one more because you are really traying to help me :-)
 
Back
Top