Kicker Solo X set-up?

  • Thread starter Thread starter FurbiesAndBeans
  • Start date Start date
F

FurbiesAndBeans

Guest
It should be loud =) even while underpowering that subwoofer.

Can't tell you the dbs you should be expecting, but im guessing you should be well into the 140s. I say ditch the cap. It's not really helping you with anything. If you want to have a second battery look into kinetic, or delta, or other car audio batteries.

I believe the zx2500.1 does rated power at 2 ohms, not 1 or 4, so that might be a wise choice. You could run it at 1 ohm, but you have to beef up your electrical so you dont fry your amplifier. Look into doing the big 3 with 0 gauge as that will help a lot and its really cheap to do =)
 
It should be loud =) even while underpowering that subwoofer.

Can't tell you the dbs you should be expecting, but im guessing you should be well into the 140s. I say ditch the cap. It's not really helping you with anything. If you want to have a second battery look into kinetic, or delta, or other car audio batteries.

I believe the zx2500.1 does rated power at 2 ohms, not 1 or 4, so that might be a wise choice. You could run it at 1 ohm, but you have to beef up your electrical so you dont fry your amplifier. Look into doing the big 3 with 0 gauge as that will help a lot and its really cheap to do =)
 
I got almost all my goodies...A 2004 Model Solo X 12" Dual 2 ohm Voice coil sub, an '03 Kicker KX1200.1, a 10 farad Tsunami Capacitor, Shuriken BT-100 power cell, gold plated battery terminals, Kicker 0 guage.....and a Tsunami 150 amp digital fuse block. The enclosure is 4.25 cf...with a 3"h x 16" w x 14" deep port....wired with 8 guage power wire for the sub hook up. I'm ripping the whole interior out of my STANDARD CAB 1995 Dodge Ram 1500 4x4 to replace the carpet with a rubber mat from Auto Custom Carpets (ACC)...how many db should I expect? I'm running a ZX750.1 to an L7 12" with the same 10 farad cap...and it's LOUD for a single sub...I'm waiting on the ZX2500.1 til mid summer...but Do you guys think the KX1200.1 will pound the sub decently? It is an old 1 ohm stable model...so I'd think it would. I'm waiting for my power cell and wire to come from Kentucky and California...but Friday is the day Dr. Crankenstein adopts a Dodge....Keep your fingers crossed.
 
It should be loud =) even while underpowering that subwoofer.

Can't tell you the dbs you should be expecting, but im guessing you should be well into the 140s. I say ditch the cap. It's not really helping you with anything. If you want to have a second battery look into kinetic, or delta, or other car audio batteries.

I believe the zx2500.1 does rated power at 2 ohms, not 1 or 4, so that might be a wise choice. You could run it at 1 ohm, but you have to beef up your electrical so you dont fry your amplifier. Look into doing the big 3 with 0 gauge as that will help a lot and its really cheap to do =)
 
Back
Top