R
ricky.132s
Guest
what size amp would work best with pioneer speakers.180w max,30w norm,4 ohm
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
D
dakota
Guest
Im assumeing you're running just two of these...
If you want to use a Class D Mono amp then get something around 60 watts RMS x 1 Channel @ 2 Ohms (wiring in a parallel circut)
If you are using a two channel amp then get something around 30 watts RMS x 2 Channels @ 4 Ohms
If you want to use a Class D Mono amp then get something around 60 watts RMS x 1 Channel @ 2 Ohms (wiring in a parallel circut)
If you are using a two channel amp then get something around 30 watts RMS x 2 Channels @ 4 Ohms
C
chris57350
Guest
exactly what the other guy said! dont exceed the 180 rms output rating though you will blow your speakers!
D
DeFalco
Guest
As long as the amps wattage (output) isn't higher than 180w max...you should be ok.
D
DeFalco
Guest
As long as the amps wattage (output) isn't higher than 180w max...you should be ok.