Can I use a zx750.1 amp to power (2) 10" Kicker CVT subs?

A

Adam

New member
I have (2) 10" Kicker CVT shallow mount subs and I'm trying to find an appropriate amp for them. Each sub is rated at 400 watts RMS 800 watts peak.

Will the zx750.1 work? Or does anyone have a better suggestion?
 
First off are the subs dvc 2 ohms or 4 ohms? because kicker amps do not like to be wired to one ohm. once you determine how many ohms you have then i can recommend an amp for you...

if your subs are dvc 2 ohm you can wire the subs down to two ohms like this picture

http://akamaipix.crutchfield.com/ca/learningcenter/car/subwoofer_wiring/2DVC_2-ohm_mono.jpg

however if your Subs are dvc 4 ohm the safest setup for the kicker amp would be to wire them to 4 ohms like this picture

http://akamaipix.crutchfield.com/ca/learningcenter/car/subwoofer_wiring/2DVC_4-ohm_mono.jpg

and as for the amp id prolly step up to the 1000.1 jus turn the gain down a little... NEVER max out the gain or risk having to buy a new amp or subs 75% is pushing it
 
Back
Top