Bypass T-Mobile G1 Google Activation by PhoneCareCenter

  • Thread starter Thread starter hadari
  • Start date Start date
nice to see ur post .
just one noob question .
how to flash it ?
where to get firmware ,rom etc?
 
hi,
Y have done some stupid things and now when after I write adb shell and press enter, it say "-a permission denied "
what to do?
how to activate the phone?
 
I keep gettin "error device not found" in comand prompt even after device is listed as ADB Interface in device manager. Tried everything....even watched the youtube link.....PLEASE HELP!!
SEE BELOW! Thanks in advance





Android Debug Bridge version 1.0.20
-d - directs command to the only connected USB devic
e
returns an error if more than one USB device is
present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is r
unning.
-s - directs command to the USB device or emulator w
ith
the given serial number
-p - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
device commands:
adb push - copy file/dir to device
adb pull - copy file/dir from device
adb sync [ ] - copy host->device only if changed
(see 'adb help all')
adb shell - run remote shell interactively
adb shell - run remote shell command
adb emu - run emulator console command
adb logcat [ ] - View device log
adb forward - forward socket connections
forward specs are one of:
tcp:
localabstract:
localreserved:
localfilesystem:
dev:
jdwp: (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] - push this package file to the device and instal
l it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data
)
adb uninstall [-k] - remove this app package from the device
('-k' means keep the data and cache directories
)
adb bugreport - return all information from the device
that should be included in a bug report.
adb help - show this help message
adb version - show version num
DATAOPTS:
(no option) - don't touch the data partition
-w - wipe the data partition
-d - flash the data partition
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-product - prints:
adb get-serialno - prints:
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
networking:
adb ppp [parameters] - Run PPP over USB.
Note: you should not automatically start a PDP connection.
refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ ]
can be interpreted in several ways:
- If is not specified, both /system and /data partitions will be u
pdated.
- If it is "system" or "data", only the corresponding partition
is updated.
C:\Users\R.$OK>\adb devices
List of devices attached

C:\Users\R.$OK>\adb shell
error: device not found
C:\Users\R.$OK>
 
@kdaviator

Bug was only detected in RC29 & RC7 Firmware that made the bypass possible, however Google are not Stupid so no bug has been detected on myTouch3G to make the bypass possible. However if anything should come up, u will be informed. Thanks to our new Moderator .:SUBRATA:. he will also keep u informed on the latest Android System Updates.

Good Luck
 
how to bypass Docomo HT-03A (known as Sapphire200) google activation?


i dont have the original simcard.


i want unlock this but menu is not activated
 
have formated the sd card fat 32
copyed DREAIMG.nbh to sd card renamed to DREAIMG.NBH
powered off phone inserted sd card
put phone in BootLoader Mode
Looading checking
then i gut that error

00028002
not allow

any ideea ?
 
I format the sd then copy the rc29 version on the sd then with the sd in the phone put my g1 in bootloader mode, wait for the update finish and the i can see on the screen "update complete UPDATE SUCCESS, press action key" What is the action key because I press many keys and nothings going on?

Please help me!
 
google t-mobile and I would put it into french please let me know if someone is how to do it thank you in advance
 
every thing is ok with my android g1 except i can't use the phone it asks me to enter unlock network code
please help
 
i found Gold card for Android ; but the problem can't pass step 4- because i can't enter phone menu to change mode.
Code: 
1. Format the microSD card to FAT32 format
 
Bypass gmail activation is not possible for newer devices. not even other version of G1.

to activate your phone, you only need a sim inside with EDGE enabled.
 
can anyone post eny other link for usb driver other link but no rapidshare please?...
 
@negrilnet

The Scroll Ball, Press it.......

I see u joined this Forum just for the G1, welcome.....

Good Luck
 
Back
Top