Best pic of your Boulevard!!!

[Darnell]

I did mine too! I just had to pry out the reflector and trim the rubber slightly and it fit right where the reflector was. Just drilled a big center hole for the wires and 2 small ones for the mounting screws. I just left it on steady burn for now. I'll try to get some pics tomorrow.

 

[Cassi Stellar(:]

Good deal!! I was thinking of putting mine on steady to avoid Mr. L.E.O.:mrgreen:

 

[Jellytots]

You have a point!
I was also thinking that the flashing may confuse some cagers, and they wouldn't notice the turn signal. It still brightens it up alot when you hit the brake.

 

[Yeah09]

Here is the pics.

 

[♫canto♫Italian♬]

Looks good J.D. Now if we can just get some decent riding weather.

 

[gothicgal122]

It's been a LONG winter, there's DUST on that fender!!!

 

[amj_619]

Yup, too many other things going on in there and I didn't get it covered up!

 

[Rotties for life!]

Come on Spring!!

 

[[email protected]]

Hell yeah!!

 

[dmnshnlz1]

The snow bike.


MySpace.com - M bike - Photo 1 of 3

 

[Zack M]

My latest.

 

[Chadwick]

Now Jim, I thought you had bought that for Mrs. D-J.

Didn't take you long to "prof" that one off her now, did it?

 

[Small Fry]

I did and did. The bike is just so dang fun to ride. Here's a comparison-to-stock pic. Look close and you'll see a lot of little tweaks and mods. BTW, those are combo bar end turn signals + mirrors.

 

[righlee18]

D-J do you have a link for those funky wee bar end indys?

 

[ronsmall]

Buster, I built them. There's only about $35 in parts, including the turn signals, but quite a few hours of work to get it all set up. Now, if I somehow damage one, I can replace it for about $14 (bracket, signal and mirror) plus about 2 hours of work. I ran 4" long steel plugs in each bar end. The plugs have a channel for the wires and I drilled and tapped screw threads in the ends for mounting the brackets.

These 2 pics were taken before the raised headlight mod and added the tool bag.

The mirrors are slightly convex so they give a bigger picture than just flat glass. They work better for me than the stock or aftermarket stemmed mirrors since none of the view is wasted on my shoulder and arms.

Here's the posts on the custom combo bar-end turn signals/mirrors over on SuzukiSavage.com:
SuzukiSavage.com - Custom bar end turn signals/mirrors ver 2.0

Here's the evolution of the project. It shows pics of fabbing the steel plugs, running wires, etc.
SuzukiSavage.com - Custom bar end mirror/turn ver 1.0 finished

 

[childlibr53]

Jim, thanks for that, now if I could just find the time to get involved in something like that I would be a happy bunny!

PS Brilliant job. :bluethum:

 

[Sydnie]

As far as I know it is a 2006 C50C, it hasn't been repainted or anything. The only thing not stock are the handle grips.

 

[wildhorse i]

I did some searching and found that out. I am looking for a 2006 just like that for my wife.

I think that is a great looking bike

 

[carissasings3]

Taken last September View attachment 17955

 

[Mariana D]

:bluethum: Excellent lookin S40 you have there DJ..........not sure if the gf would like me to do that to hers or not....but very sweet...