All about EL71 here and only here !

  • Thread starter Thread starter Abe
  • Start date Start date
Hello, I have this problem: I can boot mobile in Service mode either Normal mode.

Always "No answer on Ping". I am using A31 serial cable without power. Do I have to modify cable?

Code: 
Boot in "Service mode"...
Press RED key (Power ON)!
Auto Ignition...
Transfer boot...
Boot in "Service mode" Ok
Awaiting Power On phone...
No answer on Ping
Code: 
Boot in "Normal mode"...
Press RED key (Power ON)!
Auto Ignition...
Transfer boot...
Boot in "Normal mode" Ok
Awaiting Power On phone...
No answer on Ping
 
I have full flash from working phone.But how can i upload ? i can not unlock my EL71.Phone is ok but after 1 minute , it said :"phone locked , please turn off" !!!! Papuas said that : "must enter SKEY" .But Skey entered !
 
hi

anyone have good link for all EL71 Swup version 06,... 22..... 31.... and with Frensh langage

thx
 
THX its works...

Auto Ignition...
Transfer boot...
BOOT is loaded...
Pause 2 sec...
Getting Information...
FlashID: 0089,887E (64Mb)
CFI: 1 : 256*262144,
EL71 SIEMENS 352849010192783
HASH: C3E74708EA370AB4C87F3735E4F01734
OTP ESN: A9FD826C
OTP IMEI: 352849010192783
At occurrence of mistakes reduce speed of port!
Bcore x85 series found.
Reading of segment BCORE...
BCORE segment are kept in A9FD826C_A0000000_BCORE_070415090826.bin
Search of a segment EELITE...
Search of a segments EEFULL...
Find blocks: 52,76,5008,5009,5077,5121,5122,5123,5468
In total EEP blocks: 142
SKEY in block 5122 = "S" 58041116
HASH in block 5468 = C3E74708EA370AB4C87F3735E4F01734
EEPROM Blocks saved in .\Backup\A9FD826C_EEP_070415090934.eep
Replacement of blocks EEPROM in the buffer ...
EEPROM: Block 52 replaced.
EEPROM: Block 76 does not require replacement.
EEPROM: Block 5009 does not require replacement.
EEPROM: Block 5008 replaced.
EEPROM: Block 5077 replaced.
EEPROM: Block 5121 replaced.
New Master codes:
*#0000*12345678#
*#0001*12345678#
*#0002*12345678#
*#0003*12345678#
*#0004*12345678#
*#0005*12345678#
EEPROM: Block 5122 replaced.
EEPROM: Block 5123 replaced.
EEPROM: Block 5468 replaced.
Work with BCORE in the buffer ...
BCORE: HASH replaced to 066FC1767F28AC1F3A00A2A29E6B0ECB.
BCORE: IMEI does not require replacemen.
ATTENTION! After change HASH the pone can not Power On at once in NormalMode!
First load in ServiseMode and then pass to Normal
Record of the changed blocks in phone...
New BCORE write down in the phone.
ATTENTION! Remember new BKEY: 4325997DB6CAC1098FFEB67A6B2029E1
Write down EEPROM segments...
EEPROM segments write down.
Boot released. Everything is closed.!
Boot in "Service mode"...
Press RED key (Power ON)!
Auto Ignition...
Transfer boot...
Boot in "Service mode" Ok
Awaiting Power On phone...
Getting Information:
Model: SIEMENS EL71 39 lg1
Phone is in "Service Mode". SecurityStatus: "FactoryMode"
IMEI: 352849010192783
HWID: 407
Accumulator Voltage: 4194 mV.
Boot in "Normal mode"...
Press RED key (Power ON)!
Auto Ignition...
Transfer boot...
Boot in "Normal mode" Ok
Awaiting Power On phone...
Getting Information:
Model: SIEMENS EL71 39 lg1
Phone is in "Normal Mode". SecurityStatus: "FactoryMode"
IMEI: 352849010192783
HWID: 407
Accumulator Voltage: 4143 mV.
Phone disconnection...
Phone is Turned Off...
Phone is OFF (closed)
 
I treid today C81 with this solution. Work 100%.

Model: SIEMENS C81 38 lg4

FlashID(1) - Hersteller: 0089 (Intel), Typ: 880D,
FlashID(2) - Hersteller: 0089 (Intel), Typ: 881C.

So i think this solution is working on INTEL and ST even this isn's an EL71.
 
Ive got Brand New....EL71 here orange to be unlocked....with Bsreader all is Readed Ok...just wana make sure...in Papuas last version....what to select in B core Types x75 or x85...Thankx...waiting
 
u can easly recalculate full flash of ur EL71 without hexeditor, just use latest papua v111b, u need just a FF from working phone

1- get esn+hash with papua and TP
2-
* if Hash and bootcore imei are already rewritten (bad), just recalculate new hash with any skey (exp: 12345678), then reclaculate bootkey and make ur v_klay loader
* if Hash and bootcore imei are ok, just reclaculate bootkey and create ur own v_klay loader
3- now it's time to reclaculate ur FF with papua (check "convert" tab on papua, and use "recalc FullFlash" button
4- the rest work is with v_klay (copy loader is c/:............ drectory etc,
about rewrite bootcore with v_klay, check "options" button, then "advanced" button and check "Enable writing in bootcore of phone"



br
 
thanx again mr dagos
if the phone not repaired i wile buy it to client

it is a good day for me

i taked 12 dolar in this operation

globalsystem
 
I apreciate too much the way that you ignore my question. But I still want to know if there is another tp method, I need to flash 1 piece.
 
There must be EL71 under the X65 X75 X85 if it's the correct papuas software for EL71
 
try Unlock EL71 V31 from Tmobile (Flash Chip : 00208819 (ST) ) with papua 0.9.3 b

Achtung! Nicht mit dieser Geschwindigkeit!
Rote Taste dr
 
SecurityStatus: CustomerMode

phone must be in factory mode

i get this problem before after full repair 2 EL71

phone can't be in factory mode
 
Back
Top