Search results

No one sells a jet kit for that bike. Unless you've done some performance upgrades to the engine, a jet kit will do nothing beneficial to the engine. If you know what you are doing, the only things that can be adjusted on that bike is to change the main jet and raise/lower the jet needle...

Buy a bicycle and learn.

Because of the angle that the carbs are mounted to the cylinder head, when the carbs overflow, gas spills into the head and past the intake valves - filling up the cylinder with gasoline. If there are no signs of the float needles leaking, lower the fuel level in the float bowls. Fix this...

The blinking light is alerting you to a problem. The electric motor used to shift gears goes bad on Honda quads with ES A service manual is required to read the code. http://www.motocom.com/motorcycles/

1st or 2nd gear. When you get it rolling, jump up and plop your butt on the seat just as you pop the clutch. That will press all of your weight down onto the rear wheel, to help prevent it from skidding.

That's not a question. http://www.bikebandit.com/parts/ http://www.motocom.com/motorcycles/

Radiator repair shops will clean and seal the tank for about $100 You can do it yourself with this - http://www.denniskirk.com/jsp/product_catalog/Product.jsp?skuId=&store=&catId=&productId=p3152&leafCatId=&mmyId=

Radiator repair shops will clean and seal the tank for about $100 You can do it yourself with this - http://www.denniskirk.com/jsp/product_catalog/Product.jsp?skuId=&store=&catId=&productId=p3152&leafCatId=&mmyId=

Always give year, make, engine size and model # when asking questions. We need all of that info to give an informed answer. Sometimes the year can make a difference. If you ran a direct connection to the starter motor, the engine should turn. The (-) jumper to ground - frame or battery (-) The...

Always give year, make, engine size and model # when asking questions. We need all of that info to give an informed answer. Sometimes the year can make a difference. If you ran a direct connection to the starter motor, the engine should turn. The (-) jumper to ground - frame or battery (-) The...

Intermittent electrical problem. Possible side stand switch.

Intermittent electrical problem. Possible side stand switch.

Intermittent electrical problem. Possible side stand switch.

Intermittent electrical problem. Possible side stand switch.

At the handlebar switch connector, check for power going in and power coming out.

Custom cables - http://www.motionpro.com/custom/index.php

Loosen the axle. http://www.powersportspro.com/pages/home/default.aspx Go to - ZX1000 A1 - Swing Arm Loosen the pinch bolts at the rear of the swing arm (both sides - L&R) #92002 Using allen wrenches, turn the axle sleeves #42036 the same amount at the same time. The holes that the axle goes...

If you can turn the engine with a drill, the top end is probably worn out. Check the cylinder compression.

If you town has a sound ordinance, the noise must not exceed it. Even if it's your own land, you can be cited for disturbing the piece.

Do not attempt removing swingarm bushings/bearings without a special tool. http://www.motionpro.com/motorcycle/partno/08-0213/