Z320 a totally diffent cable :(

  • Thread starter Thread starter 07heaven
  • Start date Start date
0

07heaven

Guest
Does anyone have an idea what PIN OUT the original cable has?

RX - PIN NUMBER?
TX - PIN NUMBER?
GND - PIN NUMBER?
?

So that a modded cable can be made using a E530 connector
 
Has anyone tried unlocking this with an original cable using the QUALCOMM IMEI WRITE SYSTEM SOFTWARE.
Anyone selling this cable?
 
there is option in e530 cable also u need to cut this cable a little bit to fit and yah com1 with power supply
its will pick the serial and unlock
 
The usual Z-Series Software won't unlock the Z320i.

Dam it!

NS Dongle the only solution on this one?
 
I made cable using e530 Comport cable that has battery conector.

1, Use E530 comcable, cut one of the guides from bottom, so the cable can fit into Z320.
2, Open cable and unlsolder pins 14 & 15 (green & yellow in my cable)
3, Solder both or even 1 of them to pin 8 (the one ontop of red wire for my cable)
4, Put cable back together.
5, Unlock phone, don't forget to attach battery.

Worked for me 100%
 
ns dongle also can't do it

because don't know correct cable for it

but some dongle put Models name without knowing the cable

like ns dongle et Samsung clip for E860v in support you find D500 cable
also UST Pro II for T809, in support you find D500 cable to

very strange Samsung dongle

no one of my friend unlock it with any dongle, & you can't find any pinout for it in any support
only bla bla, "First World" but no really as I said only Bla Bla

for Z320i it's a new cable
 
so have you unlocked z320i using that way? is the phone come on tat mod? or what did u see in the screen ? !

Please explain more many thanks
 
They all assumed it was gonna be the same as all the other Z - series.

Now they'll have to wait for Samsung themselves to release a solution, copy it and paste it, and pretend they mastered it.
 
NS Dongle the only solution on this one but what cable cause NOt even NS Dongle team know what cable we have to use>?
 
I have phone here with original cabel that came in the box, the Modem is installed on port 142, but NS Dongle does not Recognise this port. Nothing happens when you press info.
 
Like i told you, you can modify original USB cable from Z320i phone to build service cable (UNLOCK)
Tested and working 100%


You can also try with modified E530 cable...
 
can anyone sell me a fully working cable for Z320i cause I need it Urgent and I don't have any time to make or modify one!

Many thanks
 
I had a go making one tonight, getting a phone in tomorrow to use it, if its any good, i'll sell and make another!
 
we made and sold soem cables already to customers
but problem is made and send its not worth

any1 can pay 20 with delivery to door no problem can make planty

thanks
regards
gsm team LTD
 
Hi,

elco has confirmed that ns dongle will do it but that phone need aspecial cable for unlock as he says here:

http://forum.gsmhosting.com/vbb/showthread.php?t=265117&highlight=z320i

But this aint in the latest version so when is it coming elco????

However VsG-GsM has confirmed it is supported in UST Pro II v1.01 here:

http://forum.gsmhosting.com/vbb/showpost.php?p=1526808&postcount=1

but if we buy UST PRO II do we get the cable???

Regards,

Fonefusion

PS NS DONGLE VS UST PRO II (looks like UST PRO winning so far!!!)
 
Back
Top