z300 and z500 unlock

  • Thread starter Thread starter monteiro-ribas
  • Start date Start date
M

monteiro-ribas

Guest
searching here in the forum i found out that i maybe can unlock z300 or z500 with winimei for z105 and the original samsung usb cable. but do i have to change my usb cable? the winimei can't detect the port com4 where the modem is installed....any sugestions??? help please
 
try uping the com to 7 and you need to make the little 9 pin conector aswell as original usb cable
 
There used to be a whole thread about how to unlock the z500.... Someone deleted it though... Pretty stupid thing to do since we had gone over most issues people would have when unlocking the z500's there. Guess we're gonna have to do it all over again
 
well guys i have found the solution....after connecting the usb cable i have to make a little trick in the port com1...i haved join the pin 2 and 3 of the com and then winimei detected the phone very well and i have it unlocked a z300 and z500 with the winimei for z105.... hope this can help anyone....


1
 
Z300 = Z500 = Z130 cables
different
Z100 = Z105 = Z107 = Z110 cables

is that true??
 
There is absolutly no need to connect the green wire from the usb cable to the pin2 and pin3 (Rx to Tx) loop. Just make the loop on com1 and leave the usb cable alone and untouched.
 
Z105 Cable conector is diferent from z300 conector. Tomas something is wrong in this... Pliz tell me something

B.R.
 
you can ulock it using usb cable

http://www.movilcom.org/noticia.asp?noticia=183

Best Regards

Tomas - MovilCom
 
hmmm, with movilcom or winimei? i'm just wondering if movilcom will work also with the z500
 
Hi MovilCom!
Can u translate it in english please!!! How should i do when i start the program???
 
You can unlock it with a code or flashing with other firmware.

www.samsungz300.tk | english forum | General | post "How to unlock Samsung Z300/Z500 ... with secret code FREE!!"
 
Today unlocked Z140V and make myself the cable using a Nec datacable modified and resolded to 6-9-10-15 very easy and simple it's the Z130 cable pinout.
Z500 have something more you must sold together pin 3-4-9
But maybe Z500 cable work as well on Z130 if somebody can test.

Sure you must connect pin 2 and 3 of the com port
it's very easy with a screw driver or a knife at the end of our cable.
 
Why temporary?

I used this method and I can use all operators. Further I have flashed several times and the lock continues disable. I thing it's the best way for unlocking and it doesn't lost the warranty
 
Just use *7465625*28782# then *7465625*28638# without SIM card,shut down the phone ,insert the SIM card and open the phone.Use this method for every network on which you want to use the phone.Tested
 
Hi,

Use Movilcoms sw i try it today with orginal Usb cabel work perfekt here are the sw und usb driver

http://forum.gsmhosting.com/vbb/showthread.php?t=228384&highlight=z105+movilcom


B.R


*AnToS*
 
Back
Top