X65 > v36, x70, x75 unlocking - STEP BY STEP!

  • Thread starter Thread starter MR PROTEC
  • Start date Start date
thanx for the reply bro...

but do i have to inverse manually the esn read and shown by px65v4 on the phone ??

BR!
 
Unlocking description for Siemens 65 (>36 firmware), 70 and 75 series with no testpoint!
The EASIEST & SAFE way:
1. Connect your phone using DCA-500 or DCA-510 cable (DCA-540 is not supported!).
2. Put px65v4 to your phone using MPM, SiMoCo or something similar (Java/Jam/Applications/px65v4).
3. Run px65v4 (Menu -> Surf & fun -> Applications -> px65v4).
4. "Local connection?" - choose "For session" and OK.
5. "Allow Java to access data cable?" - Yes.
6. Wait for displaying codes.
7. When the codes are shown, don't close the application and run Papua.
8. Choose correct COM in Установки.
9. Go to the Коды.
10. Push Px65v4. Papua should read IMEI, ESN and HASH.
11. Click Расчет SKEY и BootKEY - Papua will calculate SKEY and BOOTKEY.
12. In the phone close the application and go to the main screen. Don't turn off the phone!
13. Enter correct HWID (if you don't know what is your phone HWID, you can read it from the list near the HWID field).
14. Click Ввести SKEY в телефон. Papua will write SKEY to the phone.
15. After SKEY writting, click Freia.log.
16. DON'T SAVE *.log file! You must choose CANCEL.
17. Confirm next question (choose Yes).
18. Turn off and turn on your mobile. Simlock shouldn't exist.
Regards from Poland
Source with pictures (in Polish): http://www.siemensiak.pl/artykuly,simlock,w,siemensach,serii,65,powyzej,v36,oraz,serii,70,i,75.html
 
It depends on px65v4 generating codes time.
For me this process takes no more than 20 minutes.
The most important is that you don't have to enter the service mode, what is mentioned in most descriptions.
 
X65 > v36, x70, x75 unlocking - STEP BY STEP!

helloo guys.....i have a problem here....when i used the method you show here...i get a message from the phone that says
 
@siemensiak.pl
Where to download the px65v4
And soft for transfering like u said MPM, SiMoCo
Plz provide Valid Link Thankx in Advance
 
Solder a 15k resistor from Pin 2 to 5 and also one from 2 to 7.

After that it will work
 
I've uploaded the Px65v4.

MPM (Mobile Phone Manager) you can download from: www.siemens-mobile.com.
 
Why u suffer with entering it manually ?

Just dont close midlet app and press Px65v5 .. Codes should get entered automatically


Regards,
B
 
NO modified cable doesnt work.
It goes wild!
One moment it shows message "please connect accessorie" and next moment "please wait" and it goes round again.
Try to type your ESN and HASH manualy in papuas.
 
i got data cable dsmu 12 how can i make a X65 series data cable with This one...Plz guide me in its Midification...Thankx...WITH pic it will be LOVELY
 
hi mates,

PS
When px65v4 Midlet can't act (You can't run it) (Example c75 v>=11)then you need to use test points

Best regards,
Aishur
 
also look at http://forum.gsmhosting.com/vbb/showpost.php?p=1524726&postcount=9 for more info...
 
I just unlocked CX70 v43 using this method.But my cable is not original so i had to type ESN and HASH in papuas manualy.
But it works anyway.
 
i think for siemens phones FW lower than v36 u don't need all that just press auto open all in PapuasUtils
 
Back
Top