Wood TW6-6 TW-555 Cam Dyno Test by Fuel Moto

B

Ballin954

New member
Thanks to both you and Keith for all your work!!

Waitin' on that TW555 - but aren't we all... then I can decide which cam-set I need to swap out!!
 
Ok, here are the results of the dyno tune. Remember this is the exact combination of parts that I posted the dyno chart for earlier in day, the only difference is that instead of using the Auto Tune I did a full tune on the dyno. These are excellent numbers for a TW6-6 cam swap and you can see that the Jackpot 2/1/2 provides an excellent torque curve. The key is to having a combination of parts that work together. I was hoping for better conditions but 93Hp/100Tq is very good considering it is 80 degrees with 76% humidity.

Keith is busy back in the ship tearing the bike down to install the +4 advance gear. We will post charts with a direct TW6-6 comparison with/without the +4 gear later this evening.
 
Jamie, numbers look great. I installed the woods tw6-6 in my 103" 08 cop electra. Wondering if I do a head job this winter is this something that you are going to be able to assist with a tune or are you going to want me to go the AT route. Where I am at in BF ND we have no dyno access except for the local HD shop. I am not to keen on their advice and or their work. Is this a set up that you can get pretty close or am I going to need an all out dyno run. I am trying to figure out the best route if there is one to get the head work done and a proper tune. Thanks as always you guys are awesome.
 
This thread will be a wealth of information.
Thanks Jamie and Kieth.
I just completed installing my TW6-6 cams with 4 deg gear in my '07 RKC and look forward to seeing the comparisions
 
Pretty close to what you did (95/100) on my '10 Ultra with tw6, pc5, Pro Pipe and filter, and of course your tuning!!

I dont "think" mine had the 4 deg thing......does it?

Chris
 
Back
Top