Okay.. well I got a hold of this set up to replace the old pioneer premier subs I had, but now my question is..
what's the best way I can wire so I can get the most from this amp?
The amp is :
1 x 650 W @ 4 Ohms, 1 x 1300 W @ 2 Ohms, 1 x 2000 W @ 1 Ohm.
The sub is:
Nominal Power Handling: 2000 Watt RMS
Peak Power Handling 2500 Watt
Impedance 4 ohm (Dual Coil)
I'm confused on to whether the "4 ohm (Dual Coil)" means 2 ohms per coil, which would mean I can bring this load down to 1 ohm by wiring it, or if it means that it's 4 ohms and 4 ohms, which means the least I could run the sub would be at two ohms?
I'd really appreciate it if you guys can help me on this one,
thank you for your time
to below, it's only one sub that's going to be wired to the hifonics.. i don't know what the orion means by the specs though.. i dont understand if it's 4 ohms for both coils meaning [2 and 2] or 4 ohms per coil [4 and 4] =
what's the best way I can wire so I can get the most from this amp?
The amp is :
1 x 650 W @ 4 Ohms, 1 x 1300 W @ 2 Ohms, 1 x 2000 W @ 1 Ohm.
The sub is:
Nominal Power Handling: 2000 Watt RMS
Peak Power Handling 2500 Watt
Impedance 4 ohm (Dual Coil)
I'm confused on to whether the "4 ohm (Dual Coil)" means 2 ohms per coil, which would mean I can bring this load down to 1 ohm by wiring it, or if it means that it's 4 ohms and 4 ohms, which means the least I could run the sub would be at two ohms?
I'd really appreciate it if you guys can help me on this one,
thank you for your time
to below, it's only one sub that's going to be wired to the hifonics.. i don't know what the orion means by the specs though.. i dont understand if it's 4 ohms for both coils meaning [2 and 2] or 4 ohms per coil [4 and 4] =