when booting from usb flash disk, how to fix?

  • Thread starter Thread starter Otak
  • Start date Start date
O

Otak

Guest
"Windows could not start
because of a computer disk hardware configuration problem.
Could not read from the selected boot disk.
Check boot path and disk hardware.
Please check the Windows documentation
about hardware disk configuration
and your hardware reference manuals
for additional information."
this is a new installation,
my netbook is empty,
no OS installed...
my netbook succesfuly booting from USB flash disk,
but it's stop, and the error message pop up
"Windows could not start
because of a computer disk hardware configuration problem.
Could not read from the selected boot disk.
Check boot path and disk hardware.
Please check the Windows documentation
about hardware disk configuration
and your hardware reference manuals
for additional information."
this is new installation,
and i don't have any CD or DVD-rom,
i must boot and install from USB flash disk
but the error occur...
 
It's telling you there is no OS installed, that's why it can't boot.It's trying to boot from the hard drive and not the USB drive.You need to go into the bios and set it to boot from the USB drive first.I have no idea how to enter the bios but most times you tap delete as soon as you see your screen after start up.It should be under advanced bios settings,boot order or something close to that.

EDIT: Ok,now I understand.It is probably one of two things.You need to go into the bios and enable legacy USB.If that doesn't solve your problem,I'd say the OS files on the USB drive are corrupted.
 
Back
Top