put a 1 /2 can of sea foam in the gas tank,and also take a vac line off with the eng running 3000 rpms put the other half can in the vac hose real slow,not to stall out the eng.then take it out and run it hard about 10 mins.and did you change the hose to the egr valve,most times it looks good on the outside the inside colapes.......
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
what r the do's and dont's when cleaning throttle body (99 ford expedition)?
- Thread starter Charles
- Start date
put a 1 /2 can of sea foam in the gas tank,and also take a vac line off with the eng running 3000 rpms put the other half can in the vac hose real slow,not to stall out the eng.then take it out and run it hard about 10 mins.and did you change the hose to the egr valve,most times it looks good on the outside the inside colapes.......
put a 1 /2 can of sea foam in the gas tank,and also take a vac line off with the eng running 3000 rpms put the other half can in the vac hose real slow,not to stall out the eng.then take it out and run it hard about 10 mins.and did you change the hose to the egr valve,most times it looks good on the outside the inside colapes.......
put a 1 /2 can of sea foam in the gas tank,and also take a vac line off with the eng running 3000 rpms put the other half can in the vac hose real slow,not to stall out the eng.then take it out and run it hard about 10 mins.and did you change the hose to the egr valve,most times it looks good on the outside the inside colapes.......