D Dakota New member Sep 8, 2009 #1 im trying to put a aftermarket true oil tpressure gauge in it and i need to know the ranges
M Martinmm New member Sep 8, 2009 #2 there is no setting. once in place read the gage. depends on what oil pump you have installed too. 30lbs is good idle,not lower. 60+ is good . if all the ports are clear you will get true readings. dirty oil will show lower reading
there is no setting. once in place read the gage. depends on what oil pump you have installed too. 30lbs is good idle,not lower. 60+ is good . if all the ports are clear you will get true readings. dirty oil will show lower reading
W Walley235 New member Sep 8, 2009 #3 Depending on RPM, probabaly about 25psi at idle and 60psi revved up. The rule of thumb is approx 10psi per 1000 rpm, roughly.
Depending on RPM, probabaly about 25psi at idle and 60psi revved up. The rule of thumb is approx 10psi per 1000 rpm, roughly.
K kmp1171 New member Sep 8, 2009 #4 Do youmean the spec's ? cause ranges can vary but anything below 10psi at idle engine warm is bad
