On the kicker cvr's, peck power is 800 watt so i would go with ((2)) ZX1000.1 kicker amps, you can go to the kicker web site for move info or ((1)) BOSS CW950 i would go all kicker, it keeps it looking nice and better sound.
[Boss]
MAX POWER, 2 OHM, 1000 Watts x 2
RMS POWER, 4 OHM, 300 Watts x 2
MAX BRIDGED POWER, 4 OHM, 2000 Watts x 1
SIGNAL-TO-NOISE RATIO, 102 dB; THD, 0.01%
DIMENSIONS: 11-3/4-InchW X 2-11/16-InchH X 15-13/16-InchL
[Kicker]
Class D
Power (watts) Mono---------------------1000 @ 2 Ohms
Remote Bass Control ------------------Yes
Length (in.,cm)----------------------------16-3/4, 42.5
Height (in.,cm)-----------------------------2-1/8, 5.4
Depth (in.,cm)------------------------------9-5/8, 24.4
Frequency Response--------------------25Hz-200Hz, +0, -1dB
Input Sensitivity (High Level)-----------250mV-10V
Input Sensitivity (Low Level)------------125mV-5V
Signal-to-Noise Ratio---------------------95dB, a-weighted, re: rated power
Active Crossover----------------------------24dB/octave, variable 50Hz-200Hz, low pass only; 24dB/octave high-pass subsonic filter fixed at 25Hz
KICKEQ Boost Variable to +18dB, centered @ 40Hz
12dB/octave Subsonic Filter defeatable @ 25Hz (ZX300.1 fixed @ 25Hz)
Differential RCA inputs eliminates unwanted system noise
Automatic Turn-On Modes +12V (Remote) - preferred method; uses the remote turn-on lead from source unit; DC Offset - detects surge from hi-level speaker outputs after source unit is turned on; Audio (Signal Sense) - detects audio signal from source unit
