VX10000 Voyager with WAp and MMS tutorial, some1 had to do it...

well... since you only showed the hex i figured the ascii side wasn't ther... but that's how i found out that's what it should be as in the hex... as i changed the 0 on the ascii side. i watched the hex and noticed it changed from 30 to 31
 
Okay. Just tried the 9100 and it the Table is a little bit different. I didn't want to change the values there as I wasn't 100% sure that they are the same thing. Checking on 8500 now.
 
flash the phone and then put your clothes back on

then launch lgnpst and put it in dfu mode with the bootloader airplane mms feature

after that you must make the viftual port connect to the proxyfier with a dongle hex editor

next you will want to turn the phone on and put it in a glass of water

once in the water connect a usb cable to your phone and your pc...do not use the same usb cable for both, use two separate usb cables

now all you have to do is pour the phone and water out of the glass onto the keyboard of your laptop

when you do this you should see a blank screen on your laptop (this lets you know it's working)...if you do not see a blank screen, make sure your laptop is plugged into the wall outlet and try more water

DONE!

**NOTE**
if not using a laptop you will need to open the case of your desktop and try to spread the water and phone liberally onto the motherboard and PSU
 
I am praying that someone here can help me. I have tried Googling for help with this with no success.

I have a teenage daughter who my wife and I are afraid is getting involved with some real bad influences. She has already had a few close calls involving these "frienRAB", some involving the police.

In hopes of trying to keep tabs on her (some may call it spying, but so-be-it) we purchased a software that claims that all I have to do is install it on MY phone (LG vx10000 Voyager) and I can view her SMS sent and received texts and also see who she is calling or receiving calls from.

When I received the 'software' it came in the form of a .jar file and the only instructions that came with it said to simply move the .jar file to my phone.

2 questions:

1. I know that a .jar file is like a .zip so do I first have to extract the files first?

2. How do I install/move the .jar file or extracted files to my phone?

I would appreciate any help with this.

I am new to this forum and hope to be able to find my way back here to see if anyone answers. You can also e-mail me directly at [email protected].

Thanking you in advance.
 
ima start over from the very beginning and hopefully i'll find the problem..im getting my pic messaging its just its saying cant find the host so im pretty sure its my wap
 
dang i finally got it..i used the wrong dll for it..i use the 8300 instead of the 9900..didnt even have to change any settings just cycle the phone with the 9900 dll..thats crazy.but thxs for the help
 
Hey everyone. Trying to add wap to a Titanium Voyager. I can get MMS working. And I access the browser > Setting > FileDB in BitPim, but when I try to save FileDB to my computer to Edit it, I get a message from BitPim saying "Access to the file/directory has been blocked by the service provider." How do I get around this?
 
ive changed the file db in a hexeditor as mentioned by steve but im not sure if i am editing the right bit cause its not letting me edit the wap settings any help would be greatly appreciated.
00000c76 00 74 65 78 74 2F 70 6C 61 69 6E 00 00 00 00 00 00 00 00 00 00 00
00000C8C 00 00 00 00 00 00 00 00 00 02 00 00 00 02 00 00 00 00 00 30 10
these are the last 2 lines of my file.db the one i edited was the last one turned it from 00 to 10 but it doesnt seem to have any effect on my ability to edit the wap settings in the ##program10000 menus if this wrong please any sugestions or help would be greatly appreciated at this point.
thanx
dave
 
you are probably editing the wrong file...

you need to go to browser\settings\fileDB

you should also see verizons wap settings within the file...this is a good indicator that you are editing the right file...

here is one that is already edited with all of the wap settings for cricket...you will just need to edit the min...

enjoy.
 
Yes, I did my voyager using this guide and berrys with the 9900 dll with no problem. Its people like this that share their knowledge that make these forums great!
 
lols, well im glad u told him, i opened my back up file 2 double chek after i saw u post. im like, lol why did he do it on the hex side. i was 2 lazy 2 go look when im saw him post, but after u posted it, lol i double chek make sure was right one. thought i was lazy? what happend! i wanna refund.

ps. eskimos shave there legs
 
Hm...Is there as such thing as version 10? If so, I believe I have it. I didn't check the firmware on the phone itself but I get significantly different menus from what I see elsewhere.
 
there's nothing to worry about flashing a fone. you may possibly kill the fone but it will still be revived by the software. most important thing is, not to loose the esn/meid.
 
Back
Top