Unlocking ZV10BUFA2 fimware version

  • Thread starter Thread starter taoufik.om
  • Start date Start date
Hello. I downloaded both files but they are password protected. Please can you sent pass in PM ?
 
MY SGH ZV10 VERSION BUFB1 ""PHONE FREEZE SIM UNAVAILABLE,PLEASE CONTACT SERVICE PROVIDER".
I UNDERSTOOD FROM POSTS AND PM'S THAT "PHONE FREEZE "CAN DO IN WINIMEI ONLY"I TRIED IN WINIMEI.BUT AN ERROR " READ MASTER CONTROL LOCK FAIL"(WINIMEI WINDOW ALSO ATTACHED) .SO I THINK IT IS LATEST VERSION (RUFB1) PROBLEM IN WINIMEI
THEN I DECIDED TO DOWNGRADE VERSION BY FLASHING METHOD OF ALCOOPER(I MEAN Unlocking ZV10BUFA2 fimware version PROCEDURE)
IN MY PHONE CAN NOT ENTER IN TO FLASH MODE BY PRESSING 9 AND POWER BUTTON SIMULTANEOUSLY.IS IT ALSO LATEST VERSION PROBLEM?(ITS WINDOW ALSO ATTACHED)
i used lg 3g usb+com cable in win imei and alcooper flashing(usb only connected)
OR ANY FALSE IN MY STEPS.
THANK U
 
winimei unlock this soft version only BEFORE you flash it with another version of firm....
read all the entired post please....
for me work 10000000000% flash it and unlock it... its sooooo easy
BR
 
try with original cable....
sometimes problem are in cable...
cables that works propertly with samsung eg sometimes dont flash zv10...
BR
 
The unlock procedure for BUFB1 it's the same like on BUFA2, just do the steps from first post and everything will be ok.
About flash mode you can try to press first 9 and after that press power on(off corse with pressed button 9).
It's tested many times, and work for sure.
 
what if i used this multiloader zv10 for flashing zv30?
i had selected all 4 files : modem, rsrc1,rsrc2 and file sys.the right files.i flashed phone all ok, no error.but after flashing phone power on and a lot of coloured lines appear on display and phone don't work, only those lines.is this because i used zv1- multiloader? or does anyone have multiloader for zv 30?
used right usb data cable and full battery charged.
i had flashed my zv-30 because it had inside software eela2 which was unlockable, and can unlock only after downgrade it.
i used zv30 buej2 for flashing.
any ideeas?
now my phone is conecting to pc, i had flashed it two or three times but result is the same: a lot of coloured lines shown on display.
but when i put phone in test mode/transfer with 9 and power on the display shows all ok, so the display isn't broken.
please some advice.
thx in advance
 
Do i have use Serial cable with this flasher ?
the pinouts that are poster by the thread started are USB pinouts
I have tried with the usb cable but it did not work.
Any one clear it pkease
br
 
READ ALL THE **** ENTIRE POST!!!!!!!
BUFA2 version wil be flashed before unlock it....

links for rapidshare works great (tested for me now)


READ THIS

flasher:
http://rapidshare.de/files/16938488/...r_101.rar.html

flash file:
http://rapidshare.de/files/16939929/ZV10BUEJ7.rar.html



Flashing steps:
Input address not marked.
DON't use USB BOOT.
MOdem code: TMQZAV_ZV10BUEJ7
SHP Rsrc1: Rsrc_ZV10BUEJ7.cnt
SHP Rsrc2: Rsrc2_ZV10BUEJ7.cnt
SHP Filesystem: FactoryFs_ZV10_Vodafone

Enjoy it!
BR


PS I post it many days ago....use search buton and, of course, use your brain.....!!!!
 
use USB cable....Phone in test mode and please.... FULL CHARGED BATERY!!
it's so easy to do and in a few minutes...voila...you have the phone flashed and ready for unlock it with winimei
godd luck and BR
 
Hi for flash this phone i must use usb or com cable?
in case that it was com cable... was com cable works?
thnks and BR
 
alcooper said:
This version (how know version *#123580#) is not posible to unlock with qualcomm winimei or movilcom reader, then we must flash with fimware version ZV10BUEJ7
Using correct loader:
Loader
Flashing steps:
Input address not marked.
DON't use USB BOOT.
MOdem code: TMQZAV_ZV10BUEJ7
SHP Rsrc1: Rsrc_ZV10BUEJ7.cnt
SHP Rsrc2: Rsrc2_ZV10BUEJ7.cnt
SHP Filesystem: FactoryFs_ZV10_Vodafone


Please friends,j like flash file zv10.J can't download in the forum.Please help.J have a lot of problem with this phone
Click to expand...
 
Back
Top