Unlocking C65 v43 - full solution

  • Thread starter Thread starter pepik
  • Start date Start date
Do you have fullflash cx70 or cx65 vhit lg4, i cant use winswup to
upload language because i pach bootcore, and by partial flashing
i got more hieroglifs than lanuages.
 
hi patric try to put one zener diode of between 3.2 and 3.5 volts, in the cable conector you have cable to pins 2, 3 and 4, well, put the diode between pins 2 and 4, catode diode to pin 4.
regards
 
Well done ... its really a good and helping toturial for unlocking the x65 phones.
keep it up bro.
br
 
hi ,i was trying tounlock a cx70 v43 i hAVE JUST MADE THE TP RUNED PAPUAS ...
AutoIgnition...
Transmit Boot...
Boot loaded ...
Pause 2 sec...
Retrieve information...
FlashID: 0001,227E
SIEMENS CX7V XXXXXXXXXXXXXXX
HASH: FE3D20D573334BD10371DD089B8A266B
Unregistered version !
Wrong ESN from page "CODES" "!
??? ESN: 12345678
OTP IMEI: XXXXXXXXXXXXXXXXX
Boot unlock .

AND WHEN I GO TO "Codes" AND PRESS "Calculate Skey and Bkey" THE PROGRAM ALLWAYS ANSWRES "Wrong entry forESN!"

THX IN ADVANCE : LIZUN
 
OK, but i didn't use Eeprom tool, i stopped at "enter skey in phone".
Should I press "Service Mode" (bar Settings) before "enter skey in phone"?
 
Thanks for this great tutorial! Yesterday tested this solution on S6V v41 phone! / Used with one diode TP (1N4148) /
 
have anyone try to unlock c65 ver 56 with this software.Please tell me know .don't want to f***k client phone.


Thanks let me know
 
Hello Mates I Am Working Form Last 24 Hours Have No Success When I Conect Test Point And Press Do Job After That I Disconect Test Point And Press Calc Skey And Bakey Didnt Power On The Phone And I Got This Error
Incorrect Imei
 
...What U expect from EepromTool if mobile swiched ON? Phone MUST be swiched off, conect hem on cable(c55 cable), thab "Phone" choose "=x65", press "Init", and MUST go to "service mode".
Cheers
 
Sorry for late answer
yes maybe easy to add a 0
but in fact using the dos mapper is more easy by this way:
I have just create a go.bat
with this

"x65PapuaUtilsV038d_ENG.exe"
ren *.log siem.log
create.exe siem.log
"Siemens EEPROM tool.exe"
md backup
move *.MAP backup\
move *.log backup\

And when you have finish your work on papuas and you close it
map file is auto created and eeprom tool opened ready to load this map
when all finished map and log file go to the backup directory.


In another world a very good tip for reviving wrong software or just beeping phones:
Just select Replace 76, 5008, 5009, 5077 before booting on Papuas and
90% phones will work again.
 
Excellent work, here is a gift for the next edition the picture shows how to convert C5x cable to an AutoIgnition Cable for All CXNN phones, that can be used with Papua`s software. Cable tested and ready for use.

BR
EdnaCell
 
my phone is dead also.
I dont have eeprom backup. Can somebody send me a good eeprom? I cant write some fields in eeprom tools, it says cant access blocks....

How to revive it? I have good map, and log.
 
TNX! Just did one cx65 v41 Used x55 USB cable and no resistance between TP and ground... I`m happy!
 
Try this for repair wrong software or beep:
http://forum.gsmhosting.com/vbb/showthread.php?t=212424

Thanks Mamut
 
Dear All,
My Siemens C65 phone is locked and is waiting for PhoneCode!
Could anybody help me?
IMEI:354764009576847
Thanks
 
yep, u a another one....

bad thing is u a using papuas on English, and it doesnt work on higher 36version,

good thing u can use the newest version from Papuas site

bad things : it's on Rusian and u will see only hieroglific,

good thing u can try help with english version and compare steps

if u have luck, u will success.
 
Back
Top