Unlocking C65 v43 - full solution

  • Thread starter Thread starter pepik
  • Start date Start date
@ Ferchi

Np.. u are welcome... i hope next time u will do the back up before further action..lolz

BestRegards
 
I've found the soft you talk about. It's named calkmaster or getmaster, I've found with this names.

To make it work you need ESN, IMEI and block 5121 from Eeprom. 5121 block is one of the hidden blocks of eeprom, so to get it you must before enter Skey in phone with papuas.

So the begginig of method is same as unlocking with papuas. The difference is that when you have Skey entered, must read eeprom (I've done with with Vklay) and save only block 5121 in a bin file to open after with Getmaster (I did it with Smelter).

I think all process is longer that way than making map an writing with Eeprom Tool because calculating codes takes in my PIV 2,8 Ghz almost 6 minutes.

Once you get the codes in my S55 (don't know if in x65 you get more codes) I get nck unlock code and code to reset security code. Both things are did it if you write a unlock map to phone.

Regards
 
@ Pepik @ free4us

Great job. Keep up the good work brothers,

tested on cx70. Unlocked fine
 
...so far I have all off CX70 with the exactly SAME tp like C65. Maybe You finde some deferent?
Cheers
 
patrick, try "5008" in bar "Codes", i wanted phone code read only, but this option unlocked my phone too

b.r. adam
 
Works fine for unlock and imei change, i not use resirtor, only Jumper, but now the phone ons, get signal, 10 secnds later shut down itsles, black screnn, why its this fail???
 
use our revolutinary software by nutzo version 10 - 15 to create map, upload map with Siemens Eeprom Tools 3.15, it works like A charm...

its not easy tho to do all the steps by papua, i had to hold the test point while my mate had to short red button and the other to click do jobs, but after everything you can actually enjoy a cigar and a cold mature beer
 
@Yashaka
you just forget to put the phone in normal mode before entering Skey
PHONE MUST BE ON TO ENTER SKEY

If you continue by this bad way with Eeprom tool just the first block will
be accepted by phone
and phone not powering on after (just beep) and you have just to Flash it then repair it with Papua by the fonction recalculate Keys in Flash
and to unlock it by the good way.
 
is first cx70
I didn't saw picture in forum and I asked
then I found pic for cx65

10x

BR
Rak|m
 
Hi, i used this solution, at "Enter Skey in phone" I turned on phone (without connected TP) and..:

Checking entry values.....
Test ServiceKey...
Enter ServiceKey in phone...
SKey enter !
Pause 1 second(s)...
SecurityStatus: FactoryMode

and nothing.. i tried one more time:

Checking entry values.....
Test ServiceKey...
Enter ServiceKey in phone...
No answer from phone !
Check com port number,cable,phone and MODE !

Now, phone doesn't turn on :/ What do I wrong?
 
I try it whit C65 v41 and it is working
thank`s for Kakrysa and a big thank you for pepik
 
Hi, usually this error is caused by 7 digit Skey (instead of 8 digit Skey),
you only have to edit log and add "zero" (0) at first position of skey.
f.ex. Skey: 5654327 = 05654327
 
Back
Top