unlock MC60 v10

  • Thread starter Thread starter rmenganag
  • Start date Start date
R

rmenganag

Guest
@dagos
I've flash one of the MC60 like here:
http://forum.gsmhosting.com/vbb/showthread.php?t=193960
with the flash that I got at: http://eh.student.utwente.nl/~landy/...r=Repair_FuBu/

Before that blue screen.
Now, it doesn't power on, not even bzzzz.
What sould I do?
 
i have siemens MC60 v10
i have cut TestPoint
and tried to unlock with Freia f9_162c

but it does not work

FREIA - Engine build 9, Frontend build 3
Thanks goes out for the following:
Maxim, Rolis, Sergey, PapaJoe, Lead,
TheWizard, Jozso (for hardware and cable
support and of course beta testing),
Nico, Victor, Pinker, Tom,
and all the others who supports ...
COMM_LoadBoots : selected phone family is 10
COMM_IsBootRunning : bootcode does not seem to be running
COMM_LoadBoots : Waiting to power on the phone ...
COMM_LoadBoots : phone is powered on
COMM_LoadBoots : internal loader version is 01.00
SEC_BCDIMEIToNormalIMEI : invalid decoded IMEI
COMM_LoadBoots : EEPROM IMEI (17) is corrupt
COMM_LoadBoots : original IMEI is 351995******** (locked)
COMM_LoadBoots : found SIEMENS MC60 lgX vff (1)
COMM_LoadBoots : flash ids are 00012212 [00000000] - FFFF
COMM_LoadBoots : phone ids are 695E381B [00000000]
COMM_UpdateIMEIBlocks : update is not accepted

need help

THX
 
I have just unlocked a version 10 MC60 first time. I made the testpoint by getting a needle and lightly hitting the top of it with a hammer on exactly the point marked on Bulba thumbnail(PAGE 2). It then unlocked first time using Freia 10 MC60(non boot)
 
Ok,
try to flash your phone with the freia software using flash from:
http://gsm-multifund.de/board/downloads.php?do=file&id=300 (need to register first).
-set in "Configuration Functions": speed to 115200, without RTS and DTR and set boot type to "bootcore bug".

Br,
dagos
 
me too

i have th same problem with mc 60 v10

i u found any solution plz contac to me

and i'll contact u if i found any solution


and the same for sl 55 v16
 
I've tried to flash my mc60 with the freia software using the mc60fubu file.
I've set in "Configuration Functions":
speed to 115200,
without RTS and DTR
and set boot type to "bootcore bug".

But the result was like in picture
What should I do now? Does it has any solution?
 
Is it really possible to unlock it with the new Freia 10?

Any possibility to write fubu to phone with that version on Freia?

Will any Java patch be available to patch the bootcore?

Thanks in advance...
 
When you have patched boocore with java you have to flash bootcore too.
For flashing use goodc60bootcore.fls(use search to get it) and open it with freia10(tested this solution on 50+ phones).
thx
 
Freia 10 works 1000% with mc60 v10 with correct testpoint. Opened 2 mc60 v10. Thank you nutzo!!!!
 
Same problem on my MC60 v10. I built my own RS232 Serial interface and have it working on Siemens Data Suite but Freia & SEBAgsm unlocker for MC60 won't work.
(All these programs setup the supply voltage to the interface chip.
After messing about with various voltage supply methods I decided my hardware's OK and it's down to v10.) Logged onto forum and found you guys had same issue.
Does the MC60 have a test point fix too?
 
I unlocked one c60 yesterday with freia 10, but do not work if you dont cut testpoint.
 
I succesfully unlocked MC60 ver 10 today with griffin CRD, cut testpoint with sharp blade used magnifier and light no problems at all.
 
Back
Top