Ultimate Guide To Folding@home

Originally posted by Ariel_001@31 March 2004 - 18:04
Has anyone tryed running this as a service in win nt/2k/xp?

Anyways here are some direction on how to do it. It seems to work for me. Don't blame me if your comp blows up or something if this does something weird.

First make sure the folding@home Client is properly setup.

Then download the consol version of the client and this. Make sure the consol client is working properly first (run it first).

1. Then make a folder somewhere on your hard drive e.g
Click to expand...
 
Woot, finished my first WU, was a 1000 one, only took like 8 hours on my athlon XP 1900, but yet the I'm doing a 2500 on my Athlon XP 3200+ and I'm still at 934/2500 after 24 hours???!!!???
 
why dont you just update the first page of the old topic?

{I}{K}{E}

btw. wasnt this spammed before on all the worlds?

I move this to the lounge because I think it fits there better.
 
I don't know what's happening recently, but FAH is screwing my machines.

I did a full reinstall of XP on my newest machine, now it usually hangs after a few minutes with FAH. It isn't overclocked or anything. If I start FAH and then stop it, it still hangs after a while. But if I never start FAH then it doesn't hang.

My old machine has run for 2 years without hanging. I installed Linux on it the day before yesterday. If I run FAH it hangs within an hour, even if FAH has been cancelled. Without running FAH, it has been up for 30 hours.

Something has obviously happened with the type of projects I am currently receiving (which may have changed because of the reinstallation?), because I never had hanging problems before. I'll keep trying new projects occasionally, but until these problems go away, sadly, I can no longer commit my machines permanently.
 
Me too.. some time ago.

Didn't know there was a certificate for it.. thanks!

Rocktron%20Sert100.jpg
 
Originally posted by liquidacid@22 January 2004 - 01:22
I've joined too and will let this run at all times, unless i'm gaming. I've also had UD Agent running for a while now which helps in cancer research. My computer is running 24-7, and i'm not even at it most the time so why not use up some clock cycles.

Well done jaigandhi5, for promoting this.
Click to expand...


thanx guyz

"Every Mhz Counts" ;)
anyone wana know what gromacs are?

little summary..

What is gromacs?

Gromacs is the new folding core (FAHcore_78.exe) GROMACS provides extremely high performance compared to all other programs. For some calculations, gromacs affords benefits over the current code in FAH (the current code is based on Jay Ponder's Tinker), especially a great speed increase (perhaps up to 10x-20x)

anyone interested..? :rolleyes:
 
well Im done im frist package its was a 400 wu it took me 3 days to get it done. Im onto p563_BBA5_ext Its a Genome so I guess the things i put into the target worked because ive been doing this one for about 3hrs now and its 30/250(12%). I will never be in the top 10 but who cares im help out thats all that matters.
 
Twice now since I've been using F@H, it's crashed taking hours of CPU time with it. The first time I lost about 71% of a work unit, due to a communications error with the server:

"[06:21:45] Completed 355000 out of 500000 steps (71)
[06:33:02] CoreStatus = 1 (1)
[06:33:02] Client-core communications error: ERROR 0x1
[06:33:02] Deleting current work unit & continuing...
[06:33:22] - Preparing to get new work unit...
[06:33:24] + Attempting to get work packet
[06:33:24] - Connecting to assignment server
[06:33:27] + Could not connect to Assignment Server
[06:33:27] + Could not connect to Assignment Server 2
[06:33:27] + Couldn't get work instructions.
[06:33:27] - Error: Attempt #1 to get work failed, and no other work to do.
Waiting before retry."

Which prompted me to stop using it. I retried it the other day, got one WU completed. My PC crashed again today, and no surprise, F@H lost its WU again:

"[16:33:30] Completed 480000 out of 500000 steps (96)"

:(
 
2nd cpu now up and running - 1700XP running linux.

Started installation less than 2 hours ago and I'm using it's web browser now. :)
 
Originally posted by 4th gen@16 March 2004 - 17:22
Twice now since I've been using F@H, it's crashed taking hours of CPU time with it. The first time I lost about 71% of a work unit, due to a communications error with the server:

"[06:21:45] Completed 355000 out of 500000 steps (71)
[06:33:02] CoreStatus = 1 (1)
[06:33:02] Client-core communications error: ERROR 0x1
[06:33:02] Deleting current work unit & continuing...
[06:33:22] - Preparing to get new work unit...
[06:33:24] + Attempting to get work packet
[06:33:24] - Connecting to assignment server
[06:33:27] + Could not connect to Assignment Server
[06:33:27] + Could not connect to Assignment Server 2
[06:33:27] + Couldn't get work instructions.
[06:33:27] - Error: Attempt #1 to get work failed, and no other work to do.
Waiting before retry."

Which prompted me to stop using it. I retried it the other day, got one WU completed. My PC crashed again today, and no surprise, F@H lost its WU again:

"[16:33:30] Completed 480000 out of 500000 steps (96)"

:(
Click to expand...
The first bit (up to [06:33:02]) indicates some sort of file system error, not a communication error. Basically it could not write the results to the disk, presumably because it thought the file was corrupt. Rather than send bad results back to the source it deleted them.

The next part (up to [06:33:27]) is an attempt to get another WU. First of all it has to connect to an assignment server. This then routes the request to a Work Unit server, but as the error messages suggest it could not even connect to the assignment server.

Both of these events occuring together suggest you have some inherent instability in your system, which is causing the crash. I'm guessing that you are using FAT32 file system. When your system crashes with FAT32, the last part of the file will be lost (just like with Kazaa). So F@H thinks your results are corrupt and discards them (again, like Kazaa downloads).

Suggestions:
Convert to NTFS if you are using FAT32. It won't cure the crash but it may stop you from losing your work.
Sort out your system instability - I've found from experience that raising Vcore slightly (0.025V is usually enough) can cure this problem, even though the system is theoretically running at the correct settings. Watch your temps though.
 
Ever since today Soulseek hangs when i use the Folding thing!
Tried it without the extra commands, but it still screws up my Soulseek.
When i close the folding thing.. soulseek come's back on....

Help? I want to use them both!


:angry:
 
Originally posted by kAb@18 February 2004 - 02:36
argh wtf my work unit started over :angry:
Click to expand...
you either missed the deadline or it crashed.

edit: the new core is now downloaded by default.
 
Each type has it's own core, that's the very thing that differentiates them.

I've got a core 79 on one machine and I'm pretty sure that's Dgromacs. Not sure what cores Ambers and QMDs use.

QMD cores may use up to 1GB of main memory (source), possibly even more, but they will only run on Intel chips.
 
Back
Top