Tutorial for Samsung U410 with WAP, incoming MMS and possibly U520, U540, A870, more.

Well i found the code but i still keep getting errors. I have a samsung A840 sprint if anyone can help that would be great. I used the dll from http://www.humpa.com/vzw/ but they are not working. I used the dll from my flashing software to nothin and 2 of them i cant ever use it keep giving me this Visual C + + error. So if anyone gots any clue how to get around this let me know.
 
Need to figure out how to change the wap settings to enable the internet use...
I'm thinking about dipping into the u540 DLL to see if i can find where the 16digit password is to change hmmmm
 
I have the same problem with my u540 and u470 dlls. I really would like to know what's causing this (only on one comp, but my main one!).

And I Noticed you have the a840. Because it is a sprint phone, there is a different way to do it, and you wont be able to get mms. Just look up the method for the instinct to get WAP on your a840.
 
So there no way of gettin mms on this phone perfect. i am not really worried about wap i need to get mms on here my brother wants this phone.
 
hey steve did u ever get an error when u used the u540 dll cause i keep gettin one Visual C + + error i keep gettin it when i lood the u540 dll
 
I just flashed my juke and the mms is working just fine (really slow is this normal?) but it is sending out ...but the problem is I cannot receive anything, when I try to open a picture message it take about 5 minutes to download. When it gets to the end of the download it give me a question mark picture ...any ideas ?
 
FYI the Juke doesn't include a WAP browser--it just uses the Mobile IP settings for MMS. It can't even send or receive any file format other than pictures. They left out video recording/playback I guess because the screen is so small.

I cannot get the Juke I flashed to OTASP. The PRL sticks, and I am able to hear the "Welcome to Cricket" prompt upon *228, but then it fails about 2 seconRAB into the provisioning. I even checked the Enable OTA setting in CDMA Workshop to no avail, so I have to manually provision the phone every time.

Bummer!
 
I wish it was that easy. I can only read the basic phone information on the "Phone Info" page. When I go to the Settings page, it asks for the MSL I give it the 000000 and I get and error after a few seconRAB "Error in getting Infomation from HanRABet" (yes spelling error and all). The only thing I see that may be the problem is the worRAB change to DM Mode on the bottom left. Any ideas why I can't get past this issue?

As for the link... Thanks, but the secret menu is not the same as that phone. It can only be turned on using SPST Lite. (as far as I know) BTW I'm using the SCH-U540 version 1.0.042 DLL. Thanks for suggestions and help.
 
i get to where you enter in all the different settings in the user preferences editor. And i changed all the DNS/IP settings. I get stuck on mobile versus simple ip I think. How do you go about changing that?

Edit: Just tried and it reaRAB, not perfect, but enough to make internet work without having to do it through the phone (except for the DNS/IP menu, and messaging too)
 
Only on one of my comps. I dont know what the cause is and I can't get around it unfortunately. Same file works fine on two other machines though, so it has to be a problem with that particular comp.
 
i had this problem with the u340 dll on so many machines

the solution i found was to load ms office...i used office 2007

that fixed the problem after months of messing with it...have used that fix a couple times now
 
I dont post much, in fact, rarely ever - if at all...

I usually figure everything out on my own by searching and reading. Long nights of staying up until 2 or 3 am. However, this JUKE is kicking my tail.

I have read these posts over and over searching for the simple answer to my dilemma . I can use qpst and spst lite to do all that is required to do. One step throws me off:



I can set it to SIP only no problem, but where do I put this password in? A screen shot perhaps? Lable of the tab?

And then the second part, is the mms setting. I have enabled the hidden menu, but I would like to know what to change these settings to..

I changed them to what I have used in the past on different phones, but it is still not working on this damn JUKE. Personally I agree with what someone else said; that these phones are JUNK but, the custys buy em, and it makes my store profit. So, with nothing more to add.. I look forward to your help.
 
Back
Top