Top Shop New Style Bags

D

DeliciouslyBETH

New member
That is what we are trying to go for as well. Hopefully all will work out and I can get something for everyone to see today. We are just trying to incorperate the fender so that it will be able to work with the detatchable tour packs also. Thanks for the insite always good to hear from the riders point of view.
 
I'll sit back and wait to see what you come up with. At this point and time I'm going to go with the tourpak mount that uses the sissybar mount so you don't see all the hardware. This with your fender the back of the bike should look killer!
 
But could you use that with a detatch tourpak or even a detatch backrest with attatched luggage rack? It slooks greatm needs LED in the sides for turn signal/brake and the trilight in the bottom and it would be great.
JMHO
 
Justin, would it not be better to make it mount onto the fender. Then have an option for LED strips built into the facia also?
The other idea is a new fascia that replaces the OEM with a longer bottom, tri light fitted and have it available with or without LED strips in the facia to replace the OEM signals!

If these are mounted onto the bag itself, it will make it a pain in the arse when removing the bags for cleaning and setting down, I always set mine down on the fender side. With these att you would likely have to set em down face side. I know lay a towel down i do that too...food for thought.
No UPS guy here yet!.
 
Here is the fender cover that we are working on right now to fit the touring pack and the none tour pack bikes that are out there.
The first one will be a full fender cover that will attatch to the front of the fender and go under the u-bar. It will incorperate indentions for the OEM blinkers and will accomidated the stock tailight as well. The fender will be rolled in on the top to cover the entire fender and we are going to tighted up the tolerance where the filllers go beside bags. We are think that the tri-light will be able to be used again but what you will be able to do with the fender is either install the tri-light or smooth in the slots that the light slides into. This way you still have the option of having with or without.

The Second fender cover that you see is one that you will be able to do whatever you want with. Basically a total blank that covers everything and can be cut or left the way it is. It will be used for the riders that do not use the u-bar or the tour pack.
 
The gaps and where it meets the exhaust cut outs will line up when done. Also the bottom of the fender will be shaped different as well and be cut to be flush with the bottom of the bags themselves. Just a really ruff showing of what we are going to be doing.
 
Justin, my bags were delivered today. Upon first inspection, I didn't know if I should be pissed off at you or the other forum members for endorsing this product. The finish had round swirls and looked horrible.....then I removed the bubble wrap. WOW, what a difference! Seriously, they're awesome. The finish looks as good or better than the originals. Keep on keepin on, you're doing great. Can't wait for a fender solution, as my install with photos will have to wait til then.
 
Back
Top