Tell me any kind of se problem,i will tery to solve it only in 3 hour........

  • Thread starter Thread starter roney_nexus
  • Start date Start date
bro i have a se s500i lcd blling i do change rebon lcd lcd ic flash but same problem ,what can i do ?????????????
 
EROM "R7A024" CID: 0001
SOFTWARE CID: 0001
SIMLOCK STATE: "TAMPERED"
LOADER AID: 0002
LOADER VERSION: "R3A009"

Can't get IMEI,phone is dead
MINOR ERROR "MISC_ERROR (TA_invalid,_format_may_be_required)" IN "MISC_CLASS"
Elapsed: 21 secs.
 
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
PRELOADER SECURITY BYPASS ENABLED
CFG:111101001000
ChipID000,EMP protocol:0301
erom_readvar: can't read all data
erom_readvar: error reading unit 1/851
error while reading SIMLOCK SIGNATURE unit
phone was tampered with other software
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE,GDFS OR EMPTY PHONE
CONTINUE ON YOUR OWN RISK

PHONE STATE: "RETAIL"
FLASH CID: 0053
skipping empty loader...
ReadOTP failed
Elapsed: 8 secs.


w350 dead can you give me wat it needs tnx
 
1.how to flash settings
http://img185.imageshack.us/img185/4930/howtoflashsetting.jpg

2.how to unlock settings
http://img2.imageshack.us/img2/3739/howtounlocksetting.jpg

3.how to usb flash cable
http://img504.imageshack.us/img504/2923/howtowithusbflash.jpg

now enjoy

gd luck.........
 
hi i am using the se w705. i have put a picture on my phone background. sometimes while taking pictures, my phone decides to not save any of my picture files and when i upload them up on the computer it appears as blank images, and at that time my picture background disappears, an indication to me when my camera is not working and i have to restart my phone.
 
the problem info:

v0.915057/UNI
CARD SERIAL: 00128556
Loaded 51 flash descriptors
CFG:000100001000
ChipID:C802,EMP protocol:0401
BOOTROM MODE DETECTED
OTP DBG: [1,52,1,35887501189133]
OTP LOCKED:1 CID:52 PAF:1 IMEI:35887501189133 CERT:BROWN
LDR:2009-06-26 15:47 CXC1250843_DB31XX_CS_LOADER_ACC_SDRAM_R2A082
LDR:2009-06-26 15:48 CXC1250780_DB31XX_CS_LOADER_APP_SDRAM_R2A082
[ta_open] err:000A
Elapsed: 27 secs.
 
hi everybody,
I am working on a project wich consist of sending and receiving sms with a t610 connected to a PC. I am not using the original cable but I just use a home made one. 4---(rx); 5---(tx) and 10---(GND) via a max232 connexion to the PC is done.
and the following is what I have with hyperterminal (57600-8-N-1)

at
OK
at+cmgf=1
OK
at+cpms="me","me"
+CPMS: 16,70,16,70,16,70

OK
at+cnmi=2,1
OK
at+cscs="ucs2"
OK
at+cmgs="+221775053974"
ERROR
at+cmgs="+221775053974"
ERROR
at+cmgs=?
OK
at+cmgs?
ERROR
at+cmgs="+221775053974"
ERROR


I read somewhere it seems that DCD signal should be ON if I want to use the "at+cmgs" command.
Please any help would be greatly appreciated
 
k800 flash problem...


SIGNED MODE (USING SERVER)
CFG:100100000000
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:49 PAF:1 IMEI:35170801712495 CERT:N/A
FLASH CID:49 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
FLASH ID:897E
writing "D:\sony ericson flash files\K800\cid49\r1cf001_CXC1250210_GENERIC_WI.ssw .cry"
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is: 9100
Will flash 455 blocks...
subblock 01D NAK, [44270000/00010000]
Elapsed: 32 secs.

pls give solution bro
 
bro u will try this firmware...
R3EE001_APP_SW_1206_7099_VODAFONE_LD_REDBROWNBLUE_CID52_49_DB3150.software
R3EE001_FS_VFE_LIVE_B_LD_REDBROWNBLUE_CID52_49.software

thx bro.....
 
hello master...
I have a problem :
K700 after flash result hang or keypad not working but swicth on off run...my box is cruiser and se tool result only same problem....any solutions bro??
Thanks before
 
i have a w550 whitescreen-flashed in setool-an error in last step as below.


PHONE STATE: "RETAIL"
FLASH CID: 0049
Speed:921600
OTP: LOCKED:1 CID:49 PAF:1 IMEI:35744300376094 CERT:RED

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"


Starting embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
LDR:041214 0816 LLECXC1326743_COMPACTPRODUCTION R2AB
Flash ID check:890D
Flash props sent ok
FOUND VERSION "R4AB048_CXC1250086_CHINA_EL"
writing "D:\New Folder\6.w550\w550_fsimage_china_r4ab048.ssw"
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is: 302
Will flash 302 blocks...
SSW loading returns:0
writing "D:\New Folder\6.w550\w550_main_china_r4ab048.ssw"
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is: 369
Will flash 369 blocks...
SSW loading returns:0
LDR:COMPACT_SEMC_FS_LOADER_SETOOL2_V26
loader startup: executed
loader GDFS startup: executed
wrong response, break.
loader fs startup failed, that is fatal
Elapsed: 1003 secs.

i know only flashing-help me to repair gdfs?

thank u
 
Is it working with this type of USB cable?
http://bestcellbuy.com/bestcellbuy/images/Sony_Ericsson/Data_Cable/z520_data_cable.jpg
 
Back
Top