step repair c60 dead

  • Thread starter Thread starter dancd
  • Start date Start date
Solution is simple.
Reboot computer with phone connected. Restart winswup. When trying to connect with phone press power on. The update will start and go normally. It happend to me and this is what i have done. Phone working perfectly.

Good luck!!!
NeXuSGTS
 
If still doesn't work , replace step4 with : "upload map to phone" and upload backup map to phone , then direct unlock with option New IMEI : xxxyourimeixxx , and phone alive...Good luck!!!
 
Hi man. I need some help. i recieve one C60, one man try to unlock it and now phone is dead. TP is cutted. I flash it with friea 9, fullflash v.14, direct unlock, but phone still death and sometimes Bzzz. I try to flash it with winswup, it says "No bootcore detected", so TP cutted correct?
May be i need newest fullflash?
 
1. write c60 boot repair (select c60 boot,use write eprom )
what select?
Phone select: c60 boot ???
boot type: batched bootcore ???
presents (eeprom, custom....) ?????
2. write eeprom (select c60 normal )
and now?
Phone select: c60???
boot type: normal ???
presents (eeprom) ???
 
i flash phone with full flash + eeprom log and map and phone works ;-)

thx for help

br

szmit4 vel deejaybialy
 
This Solution does not function unfortunately always. With some phones run winswup update in the end and its working, but some phones can't because Testpoint,that's the problem.

1. write c60 boot repair (select c60 boot,use write eprom )
2. write eeprom (select c60 normal )
3. write full flash (select c60 normal )
4. direct ulock (select c60 normal )


i have repaired many phones with repair solution by viho, which did not show effect on the other Solution and phones are working.
 
Hi Members!
Not need make more step's for repair C60! Just write full flash NEWEST version , with SST v.5.32 (NOT v.5.37) , and press repair , and unlock button's. That all. Your C60 will like new one! Any other's Siemens phones can be repaired with FREIA v.10 with same method.
 
Can you send me or give me the link for C60 fullflash? I can't repair "beep" problem. Merry X-Mas!
 
hello all,

i alive two siemens c60 by 2 and 3 option but now both phone are not charging....

any one can send me solution
 
Back
Top