step repair c60 dead

  • Thread starter Thread starter dancd
  • Start date Start date
C60 - REPAIR (cut testpoint)
===================================================
1.run freia 9 or 10
2.select model C60 boot, write file
bootcore_v26(30.12.2004) as Firmware
3.select model C60, write file
eeprom_v26(30.12.2004)as EEEPROM1
4.select model C60, write file
fullflash_v26(30.12.2004)as Firmware
5.Unlocking functions > Direct unlock no
map is saved > fix imei(Update flash imei)
and unlock phone (Use original imei)

2nd try
1. write c60 boot repair (select c60 boot,use write eprom )
2. write eeprom (select c60 normal )
3. write full flash (select c60 normal )
4. direct ulock (select c60 normal )
work 1000%

when i flash with freia 9 fullflash 58% then flash error.
AND
when i flash with freia 15 fullflash 100% but not power on.there lots of
expert, any sir say what can i do?
 
a full Flash with Joker see here
http://www.4shared.com/file/73725852/a7a6c6ca/JokerV0343.html

with this file of c60 http://rapidshare.com/files/2340639/c60.rar.html
 
I think that you are missed one important step: rehot your mainboard with flux and hot air!
That is very old phone and they have lot's of problems with bad soldering on mainboards.

Regards
 
the problem is not come from bad soldering / broken flash ic...
try to reflash with other tools to make you sure what was the problem from ..
 
Back
Top