solution for cf110

  • Thread starter Thread starter nelu
  • Start date Start date
anyone can explain me with which thing can i pull the metall cover of CF110 ?

i've 5pc's .. one of them, is like CF62, easy method, without soldering..

but the rest, its soldered to the mainboard..

Which is the BEST TooL ??

Regards
 
thank you for all your helps ,, but still a question , wich cable to use , USB or COM , and have i to make a modification ,in the cable !! coz i have an USPi with Rj45- c55 ,, in running Joker 356 and clicking "CALC" it display only Start and still charging in the Soft !!!
thank's in advence for all yourhelp


Nb : i did make TP but idon't know if it's correctly done,, :s i have a hole in the main board in the place of the Cut


Thx
 
make the test point (cut the track in picture forum)
connect phone to com port
use Joker EGOLD Phone version 0.3.5.2
select Ax72/75,C110
make ReCal All Keys and be passion

Start...
Loading BootsModel(AX75)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Com1 115200 BAUD: Ok.
SIEMENS C110 lg98 Sw07
Soft FlashID: 0001/2221
FlashID: 0001/227E-2221-2201
Flash Size: 16Mb, WriteBuffer: 32 bytes
Region(1): Blocks 128, Size 128Kb
Start EEPROM segments at addres 0x7A0000
FSN: 39E8058F -> PhoneID: 8F05E839
OTP IMEI: 357547002287166
HASH: 90D9B06625050BBE8D3686DCE6D50485
Use OTP IMEI: 357547002287166
USE SKEY: 12345678
*#0000*12345678# - Network Lock
*#0001*12345678# - Service Provider Lock
*#0002*12345678# - Corporate Code
*#0003*12345678# - Phone Code
*#0004*12345678# - Network Subset Lock
*#0005*12345678# - Only Sim
Read BCORE addr: 0x800000 size: 0x020000...
BCORE backup in ".\Backup\C110lg98Sw07_BCORE_060705122355.bin" file.
Write BCORE at addr: 0x800000...
Change BCORE HASH - Ok.
Read EEPROM addr: 0x7A0000 size: 0x060000...
EEPROM backup in ".\Backup\C110lg98Sw07_EEPROM_060705122442.bin" file.
Write EEPROM addr: 0x7A0000 size: 0x060000...
Change BOOTKEY - Ok.
Change EEP0076 - Ok.
Change EEP5009 - Ok.
Change EEP5077 - Ok.
Change EEP5121 - Ok.
Change EEP5122 - Ok.
Change EEP5123 - Ok.

Enjoy
salam alah alaykom
 
ok great thanks brother !!!!
but i'have also try to do it with out the 7/9V of the USPi , but same probleme !!!
it shows only " Start " in Joker 356 and still Charging :s :s :s !!!!
any other solution plz ,,
do you have
Rx Tx Gnd sh
 
Mister, your C55 cable is working on C55?
Oh, YES?
It means you have a hardware comunication problem with your CF110..
Repair the CF110 PCB, and you will be able to do any operation with Joker.
And once again, verify the COM port and the speed!
 
I have full backup from a working CF110 phone with Joker 0.3.4.3
If anyone need it, visit my site at WwW.RailGun.Ro and go to My FTP Server section.
You will find the full flash in Siemens, E-Gold section!
username:forum
password:gsmhosting.com
 
ok thank you for all your helps brothers !! i'll try to got another Rj45-c55 cable and post results , thanks again
 
Man, do you understand english? It is nothing wrong with your cable!
Your phone is hardware damaged!
 
yeah i understand , but i didn't say that my c55 cable work on c55 i have never try it !!! so thats why i said i'll change my cable ( i will try the one who come with the UFS ) !!! thank you brother
 
i make cut, after this phone dont comunicate with pc
How solve?
i need clear personal code
 
I have used the tips of JAMLU using Jocker Vers 3.5.6


Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
BFB Speed 115200 Baud - Ok.
The block 5008 misses!
Start...
Loading BootsModel(C110)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Error: SetSpeedBaud answer code 0x98FEFE!
Start...
Loading BootsModel(C110)...
Sending StartBoot Ok.
Sending MainBoot Ok.
SIEMENS C110 lg98 Sw11
Soft FlashID: 0001/2221
FlashID: 0001/227E-2221-2201
Flash Size: 16Mb, WriteBuffer: 32 bytes
Region(1): Blocks 128, Size 128Kb
Start EEPROM segments at addres 0x7A0000
FSN: 2492782A -> PhoneID: 2A789224
OTP IMEI: 357547005978563
HASH: CB6E506282D83490DDF7682D8FD3E459
Boot terminated.
Test and Calc Skey...
BOOTKEY: C0CC843883B5B2A8D220D6512BC98F1A
SKEY: 49397481
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
HWID: 239 (C110)
C110 lg98 Sw11 17.11.05 11:03:48
IMEI: 357547005978563
DisplayID: 62, Sharp Nec PD161700
Code(05): OTP closed
Code(08): BootKEY is unknown
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 4192 mV.
SecurityMode: Customer
Send SKey(49397481)...
Phone Off.
SKey Send: Ok! All Open.
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
MobileMode: Service
HWID: 239 (C110)
C110 lg98 Sw11 17.11.05 11:03:48
IMEI: 357547005978563
DisplayID: 62, Sharp Nec PD161700
FSN: 2492782A
SW FlashID: 0001/2221
Code(05): OTP closed
Code(09): BootKEY is written in EEPROM
Code(0D): Keys are registered in BCORE
Code(13): Complete access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 4188 mV.
SecurityMode: Factory
Start...
Loading BootsModel(C110)...
Sending StartBoot Ok.
Sending MainBoot Ok.
SIEMENS C110 lg98 Sw11
Soft FlashID: 0001/2221
FlashID: 0001/227E-2221-2201
Flash Size: 16Mb, WriteBuffer: 32 bytes
Region(1): Blocks 128, Size 128Kb
Start EEPROM segments at addres 0x7A0000
FSN: 2492782A -> PhoneID: 2A789224
OTP IMEI: 357547005978563
HASH: CB6E506282D83490DDF7682D8FD3E459
Use OTP IMEI: 357547005978563
USE SKEY: 49397481
*#0000*12345678# - Network Lock
*#0001*12345678# - Service Provider Lock
*#0002*12345678# - Corporate Code
*#0003*12345678# - Phone Code
*#0004*12345678# - Network Subset Lock
*#0005*12345678# - Only Sim
BCORE HASH is equivalent - not change.
Read EEPROM addr: 0x7A0000 size: 0x060000...
EEPROM backup in ".\Backup\C110lg98Sw11_EEPROM_070103134106.bin" file.
Write EEPROM addr: 0x7A0000 size: 0x060000...
Change BOOTKEY - Ok.
Change EEP0076 - Ok.
Change EEP5009 - Ok.
Change EEP5077 - Ok.
Change EEP5121 - Ok.
Change EEP5122 - Ok.
Change EEP5123 - Ok.
 
Back
Top