SL75 Hang on GREETING SCREEN

  • Thread starter Thread starter kasamiko
  • Start date Start date
K

kasamiko

Guest
Got a siemens SL75 with startup greetings in German language..but when I tried to change the language to English I'm stuck on GERMAN Language Greeting screen!!

Any help will be appreciated...


TIA
 
SWrite Map but EEROM Tool (be carefull and don't press save all) or mapiniti will work too
 
This is how I repaired 2 set sl75, write mapping of that version SW that is in your SL75. Good luck!
 
Its not bad no one knows how to solve your phone. You just need proper service device and software.

In the first place what software did you use? try to flash again your phone after flash phone must be reformatted. Use Papuas with SL75 support.
 
Where can I get this mapping files?


@Allen

I'm using Papuas 1.1.1b to convert full flash to winswup but to no avail..


TIA
 
I got the same problem kasamiko had with his Siemens SL75. Mine is hanging on greetings (English Language). Any help?
 
For Siemens SL75:

- Fullflash your phone (including bootcore) with v39 or higher (you can find this files on Martech support area)
- IMEI Repair (using original IMEI and slow unlock/repair method ticked)
- Format FFS_1
- Power on the phone without SIM inserted and perform a Master Reset (*#9999#)
- After this, your phone will be fully working and no freezing or hanging.

b.r.

Cryspim
 
And T9 is lost. If you write T9 File back, "freeze" comes again. Tested

To solve this problem write completly new Filesystem with FFSInit or Winswup and XFS File.

But that is not the solution for freeze on start screen. This comes from EEPROM and not FileSystem!
 
Winsup to V35 version and write a SIGNED FFS v35 too file with latest winsup...
 
I only have Martech, and Martech does not support FFSInit files. With WinSwup I aways have "Function not supported until now in Mobile". Here is a signed XFS file with the original filesystem content (v.35). I can
 
And, for who wants to try, here is the tools:

- WinSwup v4.18
- SL75 v3503 Original XBZ File
- SL75 v35 Original XFS Filesystem File

b.r.

Cryspim
 
With DreamBox, the procedure is write support fullflash(v10, if i can remember), make a "repair security" in scenario mode, upgrade to v35 by dbss and write a signed XFS by winsup.
Tested with SL75 with AMD Flashes.
 
Right... DreamBox supports original XBZ a XFS files... but how to write XFS files without Dreambox? Because WinSwup does not work for me...

b.r.

Cryspim
 
Back
Top