**sl65 only beep**

  • Thread starter Thread starter infogsm
  • Start date Start date
I

infogsm

Guest
i need full flash then ver12 posted here in forum because i get always erase error with it better high version

br
 
Hey, are you sure you used SEARCH button a bit carefully ?
pwd = @@@BeQuA@@@



Regards,
B
 
thanks bro the pswd is working now
but everytime i try to flash i got erase error at the same adress !! should i rehot flash ship?
the problem is that with swup i can flash it normally?
br
 
@ infogsm

Write more details about your problems !

What soft are you using for flashing ? To know, maybe you dont need to rehot FlashIC
I dont think SWUP will fix it, but fullflash converted to SWUP with original keys of phone will !
 
ok now i got phone in test mode and when i read phone with TP it has diffrent imei and hash (because of written eeprom) and i can't calculate new skey or change imei !! i used old skey but don't work !!
for flashing i used x65flassher and vklay !!
AutoIgnition...
Transmit Boot...
Boot loaded ...
Pause 2 sec...
Retrieve information...
FlashID: 0089,880D
SIEMENS SL65 354220004214918
HASH: DF039DC53B2322FF6B9B950F968DC7DE
OTP ESN: DB1186B9
OTP IMEI: 354220006396283
All EEP blocks: 197
Not found block76!
Not found block52!
Boot unllock. Exist someth.!
Calculate KEYS..
Key not found !

help needed!
br
 
Go to Flash page Tick only: Pause, Recalc keys in flash (It will tick 2 boxes automatically)

Do job !
 
@infogsm

You have :
OTP ESN: DB1186B9
OTP IMEI: 354220006396283

So you can enter "own" skey "12345678"

After that there is a button "Recalc HASH and BootKey from ESN and SKEY"

Sorry i'm usin a RUSSIAN ver so maybe some similar ....
After that you can send SKEY into phone ...
Try it.
Papuas is very flexible program
All operations in SERVICE MODE.
BR
 
i have all the original data back(skey+imei) but still same problem !!
i think i have a problem with eelite and i'm unable to write full flash with x65flasher or vklay3.3! !! always stops in same adress!!

br
 
try in Flash Tab, check pause & Replace 67,5008.....
then use these value and make a swap flasher like video tuturial posted by BB-gsm

IMEI: 354220006396283
ESN: DB1186B9
HASH: 95531C9E9BB01B45926AAFF420E8ACE6
SKEY: 12345678
BKEY: 11855ECE1545C84A4C1C675DE98254BF
HWID: 324


maybe can help
 
I did not post any video tutorial,

Watch tutorial from Papuas site and follow it !

If flashing stops again at the same adress, then resolder Flash IC !


Regards,
B
 
the flash ship is damaged is it possible to read it and not write?
cause i can read the hole flash without problem !!but when writing i always get that erase error at adress 004E000 !!!
is there a flasher that can skip bad adresses ?
br
 
try to write ( eeprom+bootcore) with siemens eeprom tools
& all will be ok


regards
Nabil
 
@zinoubi
do you have good bootcore?
i have written good eeprom with eepromtool but still same problem!!
i also rehotted all ships but still erase error!!
br
 
Back
Top