SL45 can't turn on again.

  • Thread starter Thread starter ^NaT^
  • Start date Start date
N

^NaT^

Guest
Hi all.
My friend write flashfile to SL45 and can't turn on SL45 again.
He solve by use backup file for write fullflash to his phone but can't write fullflash to his phone.
Bacause V_KLay can't connect with his phone again.
Pls help for my friend.
Thx a lot.
 
battery pack = SL45 battery? If then he remove the battery and replace it again already but V_KLay can't connect with his phone again.
And also he remove the SL45 from sync_station and insert it again already but V_KLay can't connect with his phone again.
When click write memory V_KLay show "Connecting...Shortly press Power button or try to disconnect then connect phone again, when it is off." through.
Before writing flashfile V_KLay can connect with his phone normally.
But after My friend write flashfile to SL45,it can't connect with V_KLay again.
Therefore can't write fullflash to SL45.
Pls for help.
Thx in adv.
 
Did you try other flash writing tools, e.g. Freia v10? Maybe they can do it better?
Just to make sure: the sync station is powered by charging cable when you try flashing? You could also test a noname data cable.
 
> He try with Freia and Ksie already but can't connect with his phone again.
Before writing flashfile Freia can connect with his phone normally.
But after My friend write flashfile to SL45,it can't connect with Freia and any tool again.
> Yes, the sync station is powered by charging cable already but can't connect.
Pls for help.
thank u vary much.
 
Do you only have syncstation?
If yes, remove battery pack, reject battery pack
Start V_Klay and it's flash procdure
Wait till message "Connecting...Shortly press Power button or try to disconnect then connect phone again, when it is off" appers
Connect phone to syncstation...
Hope this will help - normally you don't have to press the power button.

Or do you have flash cable only? Then you need to press power button. I prefer cable, because syncstation sometimes let phone load it's battery and don't start flashing process

EDIT:

Do you've a backup of THIS phone or only a backup from annother? If you have backup from annother phone you need to unlock it before you can start it
 
Yes only have syncstation.
And it can't connect by this method again.
But before appear this probrem - SL45 can connect with V_Klay normally by this method.
But after appear this probrem - SL45 can't connect with V_Klay again.
Why?


Backupfile for this phone because before appear this probrem - can Backup FF by V_Klay.


Problem for currently is any tool can't connect with SL45 again.
This is message for any tool.
Freia show this message after press the power button. -->
"COMM_LoadBoots : selected phone family is 4
TTY_OpenCOMPort : opening Prodigy
TTY_OpenCOMPort : cannot open Prodigy
COMM_IsBootRunning : bootcode does not seem to be running
COMM_LoadBoots : Waiting to power on the phone ...
COMM_LoadBoots : phone is not powered on
TTY_CloseCOMPort : Closing Prodigy"
V_Klay show show this message after insert phone to syncstation. -->
"Connecting...Shortly press Power button or try to disconnect then connect phone again, when it is off"
kSIE show this message after press the power button. -->
"COMM_LoadBoots : selected phone family is 4
TTY_OpenCOMPort : opening COM4
COMM_IsBootRunning : bootcode does not seem to be running
COMM_LoadBoots : Waiting to power on the phone ...
COMM_LoadBoots : phone is not powered on"

SL45 can't connect with any tool again.
 
hmm.....
I don't have any ideas.
Try with flash-cable, because synchstation starts autoignition

What happens if you try to turn on the phone? Will backlights go on?
 
@cyperghost: The backlights will only go on, if illumination has been enabled before the last shutdown.
 
@rc
Imho think in 99% of all cases illumination is set on. If not then maybe he loads the profile block (the one for Illumination) from a working phone into the broken one - but how? Without connection?

@nat
Well if it is so as rc-flitzer descriped (you deactivated backlights) then you'll see nothing. But if illu is setted then backlights go on with coruppted IMEI (will display message "Wrong Software") and damaged battery block. It seems to be a hardware problem* but try a flasher cable - I made better experience with cable in comparement with sync station.

*
To be true I don't belive that SLIKs can be killed by any software modification.
Hardware damage: Maybe your friend got an accident with the phone? I've got two SLIKs and opened both many times and all two are working best.
 
@cyperghost:
Hm, I don't know en detail how the bootloader works for SLIK, but if you overwrite this special area, I think it's impossible to run any flashing code on the phone which is sent through data cable. Only possibility then is reflashing with some chip flash hardware tool...?
 
Hi all.
Phone come back.
My friend use new battery instead of old battery. SL45 can connect any tool again.
He said "before write flashfile - battery very low".
He buy a new battery pack and can connect any tool again.

@charlielao
@cyperghost
@rc-flitzer
@anuroj
Thank u vary much for your replies.
Regard.
 
*ouch*... It's said in every flashing guide: do NOT flash with low battery!
But good to hear that phone is doing well again.
 
Back
Top