SIEMENS IMEI PATCHER Here

  • Thread starter Thread starter samusprime
  • Start date Start date
Open Fullflash in the soft
Generate Patch
Apply patch to Fullflash with v_Klay
Write patched firmware to phone
Write the New IMEI with Joker
 
thansk bud vklay giv me error also error is so :


repair patch save error :missing old or new data
 
The soft is the ipatcher,, i found it some days ago, i tested it in some A6x and A7x models, for old old phones as the A56/C56 dont work

Just test it, you can read that it have a virus but this is just a joke (i scan it with 3 antivirus updated)

You must have a "decent" pc for run it
 
Sorry for stupid question but what does it do ?? What is it used for ??

Regards
Axe Man
 
This thread is really intrsting, thanx Tronador, I'm just reading the FullFlash off a al21, so, will try the ipatcher and will comment later.

BTW, I tried with a fullflash not extracted from the phone, and ipatcher found no strings.
And tronador, any experience yet with S-Gold based phones ?
 
HOW TO MAKE A PARTIAL BIN FOR JOKER

If you dont know partial address for this models but is easy obtain it

it can be calculated:

Flash Start Address + Patch Address

The Flash Start Address you can obtain selecting Fullflash in Joker

Example:

A70/A71:

start address patch address
0x800000 + 0x2884D6 = 0xA884D6

you must read a block of 64kb then do you read 0xA80000 with size 10000 (64KB = 65536bytes = 0x10000 )

Then you can apply the patch to this partial flash, removing the first to numbers:

2884D6: ----> 84D6:

Patch it and write back the partial bin.

And to finish you must Write New IMEI in Joker.


In others models is easier because it have, start address 0x000000 (AX75,AX72,CF110....) in this case the bin address = patch address

WBR
 
Back
Top