Siemens C75 V13 won't unlock with papua38

  • Thread starter Thread starter gsmfriend
  • Start date Start date
G

gsmfriend

Guest
hi friends

I have siemens C75 V13 , when I try to unlock it with papuautil v38 or higher
I get this log (with testpoint):
-------------------------------------
AutoIgnition...
Transmit Boot...
Boot loaded ...
Pause 2 sec...
Retrieve information...
FlashID: 0089,880D
SIEMENS C75 P
Wrong information !
 
Use the latest version of papautils,if your phone has got Java you can use java middlet for extract ESN/HASH from phone calculate SKEY and BOOTKEY?Put your phone on or in service mode and then enter SKEY.All will be ok.
Of course choose the right HWID.
 
yes,use latest papuautils with TP,your HASH is corrupted,i tried to calculate SKEY but no results.
 
@ ramos

Very funny, one must use Java, second TP ?! Why ?


This is not needed anyway !

I wrote solution already above, if you have another idea you can post, but dont spam, ok ?!

Regards,
B
 
plz provide me papua latest version n also give me detail that how to use when i unlock c 75 with papua n plz also provide me c75 test point


Thnxxxxxxxx
 
u can download new papuas from www.schwantz-i.org and use test like in c65.Also u can download the new siemens test point staion programe from the same web site were u have all the test points with pictures. When using test point use a 16-50 ohm resistor.
 
Some versions of C75 cannot be read by papautils because the returned IMEI is corrupted (it miss some digits).When the case is present ,must enter manually IMEI,HASH and ESN.
For the second case,this guy got bad data by using Test Point,so i adviced him to make again the procedure with the latest version.
Two ways for unlock,all people know.
I don't spam but reply to two posters who asked us two differents questions.
Sincerly,Ramos.
 
TO ALL: NO TP anymore
. put px75v1 java app on your phone in java/jam/games folder and run that app
. it will calculate you Hash & ESN codes after few minutes, write them to paper
. disconnect cable & turn off mobile
. Connect UNLOCK cable to phone & run x65PapuaUtilsV075-eng.exe
. In codes tab of papua's soft write first IMEI & ESN (papuas) then HASH.
. Click Calc SKEY + BootKey button.after less than minute you will got SKEY & BootKey calculated
. Go settings clik service mode.than release Skey.
. now enter SKEY in phone...must show factory mode ..ok
. Now Click on Freia.log button
. Now choose "cancel" & now OK.. blocks will be written to phone & phone will be unlocked

advice : not use the ESN(flasher)use ESN(papuas).

enjoy

br
sm4rtboy
 
@gsmfriend
use the ESN(papuas) and calaculate again..
-------------------------------------------
hi man...NO TP anymore
try again and use the ESN(papuas) and calaculate again..
than post results ..
most work ..

enjoy

sm4rtboy
 
How will I put the java app on the phone then and which file is the java app?

Regards,

Kelvin
 
http://chaos.allsiemens.com/download/px75v1.rar
Here you have the midlet. There is second way to unlock. When you'll download IMEI, HASH and ESN and calculate SKey and BKey, just go to "Other" tab and there skip "Recalc All Keys" and press Do It. A minute later phone will be unlocked.
 
Back
Top