Siemens A70/A75/AX75 unlocking (post only here!)

  • Thread starter Thread starter sam unlocker
  • Start date Start date
hi
here : Joker Siemens EGOLD Phone ver 0.0.9
http://www.schwantz-i.com/siemens/JokerV009.zip
pass: i-ztnawhcs
enjoy
post results................

sm4rtboy
 
Sir,

this is zia
there is a Seimens A75 requesting subset code the cell info is
Benqs30880-s2790
fcc ID pwx-a75
IC: 267E-A75
 
After unlock two A70 via testpoint and JOKER 005, I have quiet noise in speaker, after rejecting incoming call. Any Ideas? I was tryed jokering via latest 015 and same result. Can you some send me original locked EEPROM who was readed via JOKER 015?
[email protected]
After service mode I have:
IMEI:
FlagStatus: 255
SecurityMode: Error

MANY THX
 
Hey man I do the cut and I pres Recalc all keys and my phone will be unlock??? And the sim must be in the phone or out when I do this??
 
AX72 V01
Joker V0341

Start...
Loading BootsModel(AX75)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Com1 115200 BAUD: Ok.
SIEMENS AX72 lg98 Sw01
Soft FlashID: 0001/2221
FlashID: 0001/227E-2221-2201
Flash Size: 16Mb, WriteBuffer: 32 bytes
Region(1): Blocks 128, Size 128Kb
Start EEPROM segments at addres 0x7A0000
FSN: 1B48B6F9 -> PhoneID: F9B6481B
OTP IMEI: 357402005009979
HASH: 05FC8A0F78CF561738EDB2A7828EE58A
Use OTP IMEI: 357402005009979
USE SKEY: 12345678
*#0000*12345678# - Network Lock
*#0001*12345678# - Service Provider Lock
*#0002*12345678# - Corporate Code
*#0003*12345678# - Phone Code
*#0004*12345678# - Network Subset Lock
*#0005*12345678# - Only Sim
Read BCORE addr: 0x800000 size: 0x020000...
BCORE backup in ".\Backup\AX72lg98Sw01_BCORE_060308052717.bin" file.
Write BCORE at addr: 0x800000...
Change BCORE HASH - Ok.
Read EEPROM addr: 0x7A0000 size: 0x060000...
EEPROM backup in ".\Backup\AX72lg98Sw01_EEPROM_060308052804.bin" file.
Write EEPROM addr: 0x7A0000 size: 0x060000...
Change BOOTKEY - Ok.
Change EEP0076 - Ok.
Change EEP5009 - Ok.
Change EEP5077 - Ok.
Change EEP5121 - Ok.
Change EEP5122 - Ok.
Change EEP5123 - Ok.

Done !


WBR
Kuku
 
.:Kuku:.

Can this Joker method be done via the PC USB/Serial connection to the PC then?

What type of cable do I need to purchase? I haven't got a USB cable so not sure what type to get, there are a few on ebay so will go for one of them if thats all I need to get my AX72 unlocked.

Thanks
 
hi I did the test point, I push recalc all keys and an eror ocured, and now my phone it's loked on all networks. Please help the eror is in the picture.
 
Greetings. I recently sent an unlock request to Uniquephones.com and they said my Siemens A70 could not be unlocked. Is that generally true of this phone model??
Thanks....
 
And what solution CXI70 and CU65 ?

I have phone but can not find test point or solution to do it.
 
There are 2 different FlashIcs in A70

And you have the newest one with only 4MB FlashIC.

You need a FUBU read from another 4MB phone and write it to your one. That's all
 
No need I resolved the problem. The solution with recalc all keys it's not good, I push calc Skey and send Skey and now the phone it's unlock and working.
 
sw v0.17 is out,with few functions added...
User code manipulation,etc
WBR From zemun
 
I have problem with A75 unlocked by joker.
Phone don't power.
This is log"Start...
Loading BootsModel(A75)...
Sending StartBoot Ok.
Sending Boot2 Ok.
Sending Boot3 Ok.
Sending MainBoot Ok.
Com1 115200 BAUD: Ok.
FlashID: 0001227E
Error: ReadEEP5009 answer code(45)!
"
I need eeprom or full backup. email [email protected]
Thank's!
 
@stargsm_ro

I had the same problem today with a c55 (Error: ReadEEP5009 answer code(45)) with versions 15 and 17 , try use older software , i hope it will help you.

regards
golumbu
 
Back
Top