SE Compensator Review (A bit lengthy)

C

ChitT0wn Maniac

New member
I had to modify my SOHO wedge to get it to work properly, and a year later it is still performing well. Also, I have heard that they improved them since (but I havn't seen a test on the "improved" version).
Mine would bind up until I added a spring behind the wedge. All good now.
 
Thanks for the quick replies Nemick, HDV-glide, Faast Eddie, all. I measured the stack and the splined shaft with extension and determined the springs must be compressed about 1/3 inch by the bolt before it bottoms out and can be torqued. Clearly, there will be no slack under that kind of tension.

It still curious to me that it looks like there is effectively a "frozen" compensator under all but heavy torque loads (e.g. drag racing shifts). Ah well, it works and that's the bottom line
 
Back
Top