Okay, first things first. I guess that you have access to the switch. I also hope you have some kind of voltage tester? Lets verify power to the switch. Test from the TAN wire to a solid ground [ that should be the BLACK wire] , That is your power feed to the switch. Anything? If not go to the fuse panel in the interior, look for the circuit breaker in slot 19, its silver metal. Unplug and check for voltage at one of the terminals. The key must be in the ON position for these tests. If voltage present, then its the cb, if not, get back with me. I'll allow e-mail for a short time.
