Samsung U740 WAP/Cricket/Clicks Help

look in the instructions in post #2...it is what you must enable from "0" to "1" to change settings...just make sure that you change it back from "1" to "0" when you are done...





he doesn't tell you to change the "1" back to "0" when you are done...if you don't, the phone will revert back to verizon settings anytime user accesses any verizon web content (vzw home, music, etc.)...
 
this thread has been edited to remove the childish bickering. please create your own thread to advertise/brag, so i can ban whoever makes posts like this without posting the actual information about how to flash the phone.

if someone has a solution to the original problem here, please post it so we can add this to the sticky.
 
i had a similar prob with a prl on some phone about a year ago...i just wrote the prl with 5 different programs and then it was there

not sure if it will work for you or help at all, but it think i used cdma workshop, lgdownload (obviously spst for you), patagonia, qxdm, and qpst

if you do that and still have no prl, then you'll just need to fiddle with it...that's usually how we get stuff if there is no answer...we just play with it until something gives...that's why sometimes someone will post that they did something but have no idea how they did it
 
On behalf of all us Cricket hackers, I must say, "Job well done!", fellas.

Thanks for all your hard work and contributions. :clapping:

These settings look like they might work for Sprint's A900..... ;)
 
One thing that isn't mentioned in this thread that i had to do was force it to 1X (it was just getting D). Sorry i can't help you out with that because I don't have more anymore and can't remeraber how I did it.
 
yes pls, it seems after all the hidden menu settings and changing simpleip in qpst that all of us are still not gettin wap or mms. it keeps show network unavailable and that the proxys on primary and seconday ip change to 0.0.0.0
 
ok ... i used qpst and changed all the settings found on this post on the phone and through qpst.... yet .... when i try to *228 i still get the verizon message :doh: i enterered the setting in qpst as per this post and clicked write to phone ... phone shuts down and when i turn back on while still connected to pc ... pc does not auto detect phone till i restart qpst ... then when i go back into phone all settings that i changed are there except under PPP config my USER ID says [email protected] instead on mynuraber@cricket .... i've changed it several times and clicked write to phone but it keeps going back to that .... also in bitpim i copied the 1039 prl file to the prl folder but it will not let me delete the old ones that verizon put on the phone ..... any insight to resolve this would be greatly appreciated .... i have already switched daughters service to this phone and she's driving me NUTS cause she can't use it!!!!
:buddies:
 
Maybe I am missing something..... When I am reading phone with sam pst lite and opening sam pst. I can edit. But when I opening *.mmc file back to pst lite to write it doesnt see any changes in MMS_Param_Table. Its Clean :mad: !

And some settings are getting back to VRZ. Browser settings is getting my min or getting 40200000000. Its happening with different settings. I changed to 1 from 0.

At first I did all operations with Sam pst(lite), qpst, then manually in browser settings. Can somebody tell procces .........I mean qpst,pst...... Thanks in advance :clapping:
 
read more...and when you're done...read more.

do you really think it's a good idea to put your address up on the web...what if you piss off the wrong anal rapist???
 
also i see reference to a dll. .... could that be what i'm missing ... where do i get it and how do i load it. i have been reading posts for days and i can't find it.
 
Back
Top